Design maps for failure of all-ceramic layer structures in concentrated cyclic loading

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of off-axis concentrated loading on failure of curved brittle layer structures.

A study is made of the effects of superposed tangential force by off-axis indentation loading on curved bilayers consisting of brittle shells filled with polymer support material. Such loadings are pertinent to all-ceramic crown structures on tooth dentin in occlusal function. Layer flexure places the ceramic undersurfaces in tension, leading to fracture by initiation and propagation of radial ...

متن کامل

investigating the feasibility of a proposed model for geometric design of deployable arch structures

deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...

The influence of veneering porcelain thickness of all-ceramic and metal ceramic crowns on failure resistance after cyclic loading.

STATEMENT OF PROBLEM In some clinical situations, the length of either a prepared tooth or an implant abutment is shorter than ideal, and the thickness of a porcelain crown must be increased. Thickness of the coping and the veneering porcelain should be considered to prevent mechanical failure of the crown. PURPOSE The purpose of this study was to investigate the influence of veneering porcel...

متن کامل

Failure Modes in Ceramic-Based Layer Structures: A Basis for Materials Design of Dental Crowns

A research program on failure modes induced by spherical indenters in brittle layer structures bonded to polymeric substrates, in simulation of occlusal function in all-ceramic dental crowns, is surveyed. Tests are made on model flat and curved layers bonded onto a dentin-like polymer base, in bilayer (ceramic/polymer) and trilayer (ceramic/ceramic/polymer) configurations. All-transparent syste...

متن کامل

The effect of zirconia framework design on the failure of all-ceramic crown under static loading

PURPOSE This in vitro study aimed to compare the failure load and failure characteristics of two different zirconia framework designs of premolar crowns when subjected to static loading. MATERIALS AND METHODS Two types of zirconia frameworks, conventional 0.5 mm even thickness framework design (EV) and 0.8 mm cutback of full contour crown anatomy design (CB), were made for 10 samples each. Th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Acta Materialia

سال: 2007

ISSN: 1359-6454

DOI: 10.1016/j.actamat.2006.11.042