DESIGN FORMULAS FOR ROTATIONAL DEFORMATION OF LAMINATED RUBBER BEARINGS BASED ON FINITE ELEMENT ANALYSES
نویسندگان
چکیده
منابع مشابه
An Efficient Finite Element Formulation Based on Deformation Approach for Bending of Functionally Graded Beams
Finite element formulations based generally on classical beam theories such as Euler-Bernoulli or Timoshenko. Sometimes, these two formulations could be problematic expressed in terms of restrictions of Euler-Bernoulli beam theory, in case of thicker beams due to non-consideration of transverse shear; phenomenon that is known as shear locking characterized the Timoshenko beam theory, in case of...
متن کاملFinite Element Analyses of Wood Laminated Composite Poles
Finite element analyses using ANSYS were conducted on orthotropic, polygonal, wood laminated composite poles subjected to a body force and a concentrated load at the free end. Deflections and stress distributions of small-scale and full-size composite poles were analyzed and compared to the results obtained in an experimental study. The predicted deflection for both small-scale and full-size co...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولOptimal Design of Bending Pneumatic Rubber Actuator Based on Non-linear Finite Element Analysis
This paper shows a new design and prototyping method for pneumatic rubber actuators. The method enables us to design pneumatic rubber actuators optimally and efficiently based on static analysis using non-linear finite element method, in which geometrical and material non-linearity are considered and also enables us to prototype them rapidly and efficiently by a CAD/CAM based rubber moulding pr...
متن کاملSpectral Finite Element Method for Free Vibration of Axially Moving Plates Based on First-Order Shear Deformation Theory
In this paper, the free vibration analysis of moderately thick rectangular plates axially moving with constant velocity and subjected to uniform in-plane loads is investigated by the spectral finite element method. Two parallel edges of the plate are assumed to be simply supported and the remaining edges have any arbitrary boundary conditions. Using Hamilton’s principle, three equations of moti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshuu A
سال: 2009
ISSN: 1880-6023
DOI: 10.2208/jsceja.65.574