Design for the National RF Test Facility at ORNL
نویسندگان
چکیده
منابع مشابه
Radiation Shielding for Superconducting RF Cavity Test Facility at A0
The results of Monte Carlo radiation shielding study performed with the MARS15 code for the vertical test facility at the A0 north cave enclosure at Fermilab are presented and discussed.
متن کاملDesign of the Laser-Driven RF Electron Gun for the BNL Accelerator Test Facility
The BNL electron gun will incorporate a laser-driven photocathode in the wall of a 1 cell RF cavity operated at a peak field of 100 MV/m. Pulses of 4.5-MeV energy, 5-ps width, and 1-nC charge will be produced with very little emittance growth due to the effects of space-charge and nonlinear RF fields. The design of the gun was aided by extensive computer simulation described here.
متن کاملLow-Level RF System Design for the Accelerator Test Facility (ATF) Damping Ring
The ATF damping ring [1] was built to demonstrate the production of low emittance, high current beams for future linear colliders. To attain high beam currents, multiple high current bunch trains are required. The low-level rf system should be designed to minimize both steady-state and transient beam loading effects in the accelerating cavities. In addition the design should be sufficiently fle...
متن کاملDesign of the 15 GHz BPM test bench for the CLIC test facility to perform precise stretched-wire RF measurements
The Compact Linear Collider (CLIC) requires a low emittance beam transport and preservation, thus a precise control of the beam orbit along up to 50 km of the accelerator components in the sub-μm regime is required. Within the PACMAN3 (Particle Accelerator Components Metrology and Alignment to the Nanometer Scale) PhD training action a study with the objective of pre-aligning the electrical cen...
متن کاملRadiation Shielding Issues for Superconducting RF Cavity Test Facility at Fermilab
The results of Monte Carlo radiation shielding study performed with the MARS15 code for the final design of the vertical test cryostat facility to be installed in the Industrial Building 1 at Fermilab are presented and discussed.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Technology - Fusion
سال: 1983
ISSN: 0272-3921
DOI: 10.13182/fst83-a23060