Design, fabrication and performance of a 1.29 T Bi-2223 magnet
نویسندگان
چکیده
منابع مشابه
Magnetic Shield Using a Bi-2223 High-Temperature Super- conductor
Katsumi Ohata* Junichi Sato* ABSTRACT: Magnetic shielding for strong magnets using a high-temperature superconductor that can be operated at liquid nitrogen temperature has been studied. Long and large-cross-section (9 mm wide and 0.5 mm thick) 54-filament Bi-2223/Ag tape was developed. Double pancake coils were wound using the tapes having sufficient bending strain tolerance for the react-and-...
متن کاملa study on the design of bio-ethanol process from date wastes of sistan and baluchistan province
اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...
Precursor Size Effects on Kinetics Parameters of Bi-2223 Growth
The Bi-2223 phase growth was studied on the view growth Kinetics and described by using suggested kinetic equations, and the kinetics parameters of the 2223 growth were experimentally determined. The precursor particle size effect on Bi-2223 phase growth was studied, as well. Precursors in this experiment were made by four different techniques with different particle sizes, and samples were sin...
متن کاملEffect of Co3O4 Nanoparticles Addition on (Bi,Pb)-2223 Superconductor
The effect of nano Co3O4 addition on the superconducting properties of (Bi, Pb)-2223 system was studied. The samples were prepared by the acetate coprecipitation method. The Co3O4 with different sizes (10-30 nm and 30-50 nm) from x=0.00 to 0.05 was added to Bi1.6Pb0.4Sr2Ca2Cu3Oy(Co3O4)x. Phase analysis by XRD method, microstructural examination by SEM and dc electrical resistivity by four point...
متن کاملDesign and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Superconductor Science and Technology
سال: 2001
ISSN: 0953-2048,1361-6668
DOI: 10.1088/0953-2048/14/7/303