Design, Fabrication, and Characterization of a Compact Hierarchical Manifold Microchannel Heat Sink Array for Two-Phase Cooling
نویسندگان
چکیده
منابع مشابه
Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models
Subcooled flow boiling in multi-microchannels can be used as an efficient thermal management approach in compact electrical devices. Highly subcooled flow boiling of HFE 7100 is studied in two microchannel heat sinks to choose a proper numerical model for simulating boiling flows in microchannels. Results of five different numerical models, including Volume of Fluid (VOF), Eulerian boiling, Eul...
متن کاملExperimental study of convective heat transfer coefficient of MgO nanofluid in a cylindrical microchannel heat sink
Convective heat transfer of MgO-water nanofluid in a microchannel heat sink is experimentally investigated in various concentrations of 0.01, 0.05, 0.1, and 0.6 wt%. The microchannel consisted of 48 parallel rectangular cross section channels with the height of 800 µm, width of 524 µm and length of 52 mm. A well stability duration (ca. 1 month) was resulted by a 180 min ultra-sonication of the ...
متن کاملAnalysis of flexible microchannel heat sink systems
In this work, single layered (SL) and double layered (DL) flexible microchannel heat sinks are analyzed. The deformation of the supporting seals is related to the average internal pressure by theory of elasticity. It is found that sufficient cooling can be achieved using SL flexible microchannel heat sinks at lower pressure drop values for softer seals. Double layered flexible microchannel heat...
متن کاملExpanded Microchannel Heat Exchanger: Design, Fabrication and Preliminary Experimental Test
This paper first reviews non-traditional heat exchanger geometry, laser welding, practical issues with microchannel heat exchangers, and high effectiveness heat exchangers. Existing microchannel heat exchangers have low material costs, but high manufacturing costs. This paper presents a new expanded microchannel heat exchanger design and accompanying continuous manufacturing technique for poten...
متن کاملTwo-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II—heat transfer characteristics
This paper is the second of a two-part study concerning two-phase flow and heat transfer characteristics of R134a in a micro-channel heat sink incorporated as an evaporator in a refrigeration cycle. Boiling heat transfer coefficients were measured by controlling heat flux (q00 = 15.9 93.8W/cm) and vapor quality (xe = 0.26 0.87) over a broad range of mass velocity. While prior studies point to e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Components, Packaging and Manufacturing Technology
سال: 2019
ISSN: 2156-3950,2156-3985
DOI: 10.1109/tcpmt.2019.2899648