Design equations for the reflectivity of deep-etch distributed Bragg reflector gratings
نویسندگان
چکیده
منابع مشابه
Transmission comb of a distributed Bragg reflector with two surface dielectric gratings
The transmission behaviour of a distributed Bragg reector (DBR) with surface dielectric gratings on top and bottom is studied. The transmission shows a comb-like spectrum in the DBR band gap, which is explained in the Fano picture. The number density of the transmission peaks increases with increasing number of cells of the DBR, while the ratio of the average full width at half maximum to the c...
متن کاملUltra-short distributed Bragg reflector fiber laser for sensing applications.
We present an ultra-short distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber. The entire laser is only 8.4 mm in length. The lasing threshold is less than 1 mW. The optical signal-to-noise ratio of the laser output is better than 70 dB. The laser emits two orthogonal polarization modes and generates a beat signal with signal-to-noise ratio of approximately 70 dB and 3-dB li...
متن کاملRegenerated distributed Bragg reflector fiber lasers for high-temperature operation.
This Letter presents distributed Bragg reflector (DBR) fiber lasers for high-temperature operation at 750°C. Thermally regenerated fiber gratings were used as the feedback elements to construct an erbium-doped DBR fiber laser. The output power of the fiber laser can reach 1 mW at all operating temperatures. The output power fluctuation tested at 750°C was 1.06% over a period of 7 hours. The the...
متن کاملanalysis of three section distributed bragg reflector tunable laser diode based on the transfer matrix method
we present a detailed analysis of the static tuning characteristics of three section tunable distributed bragg reflector (dbr) laser. the analysis is based on the transfer matrix method (tmm), transmission line and scattering theory. the key feature of the analysis is the use of modified oscillation condition. with the exact oscillation condition, the static tuning characteristics such as thres...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Lightwave Technology
سال: 2000
ISSN: 0733-8724,1558-2213
DOI: 10.1109/50.827516