Design Considerations for Integrated Radar Chirp Synthesizers
نویسندگان
چکیده
منابع مشابه
Waveform design considerations for CASA radar network
The Center for Collaborative Adaptive Sensing of the Atmosphere (CASA) is embarking on a paradigm of network of small radars to sample the atmosphere at high resolution. A fundamental physical limit imposed by transmission from single radar is the problem of decreasing resolution as a function of range. In addition the lowest coverage altitude increases with range due to earth curvature. As an ...
متن کاملDesign and Calibration of Integrated PLL Frequency Synthesizers
Thanks to its ability to generate a stable yet programmable output frequency, Phase Locked Loop (PLL) frequency synthesizers are found in most modern radio transceivers. All practical PLL implementations suffer from unwanted frequency components such as phasenoise and spurious tones, and since these components affect system performance they must be predicted and minimized. This thesis discuss t...
متن کاملIntegrated Radio Frequency Synthesizers for Wireless Applications
This thesis consists of six publications and an overview of the research topic, which is also a summary of the work. The research described in this thesis concentrates on the design of phase-locked loop radio frequency synthesizers for wireless applications. In particular, the focus is on the implementation of the prescaler, the phase detector, and the chargepump. This work reviews the requirem...
متن کاملDesign and Development of a Low Cost Chirp Generator for Airborne Synthetic Aperture Radar
An airborne C-band Synthetic Aperture Radar (SAR) has been designed and developed over the past few years as a key geometric data source for environmental monitoring by the Centre for Applied Electromagnetic of Multimedia University (MMU), Malaysia. Several modifications and enhancement are underway on top of the successful construction of the current SAR prototype. The highlight of this contin...
متن کاملFully integrated CMOS transmitter design considerations
Traditionally, multiple IC chips are needed to build transmitters (Tx) used in wireless communications. The difficulty with a full Tx integration is that each Tx building block uses different technology. A power-detection circuit will exploit the Schottky diode, while the modulator IC is integrated with BiCMOS or SiGe. Likewise, the digital control loop is implemented in CMOS. Now that directco...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2019
ISSN: 2169-3536
DOI: 10.1109/access.2019.2893313