Design and Simulation of Ethylene Cooled Microchannel Heat Exchanger for Micro Processors
نویسندگان
چکیده
In this study, a microchannel heat exchanger with operating ethylene was proposed instead of air-cooled microprocessor sinks and flow transfer simulations were made using Flo-EFD software. First, the temperature distribution air domain in computer case obtained for sink, then paths coming from outside help fan observed. Afterwards, system micro channel subjected to same processes results compared. As result it revealed that reduced processor between 54-55°C 18-19°C. It has also been observed removing sink allows drawn environment circulate more efficiently around other generating elements case. Hence homogeneous lower within obtained.
منابع مشابه
simulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولExpanded Microchannel Heat Exchanger: Design, Fabrication and Preliminary Experimental Test
This paper first reviews non-traditional heat exchanger geometry, laser welding, practical issues with microchannel heat exchangers, and high effectiveness heat exchangers. Existing microchannel heat exchangers have low material costs, but high manufacturing costs. This paper presents a new expanded microchannel heat exchanger design and accompanying continuous manufacturing technique for poten...
متن کاملEnhanced Design of Cross-Flow Microchannel Heat Exchanger Module for High-Performance Aircraft Gas Turbine Engines
Boiling and Two-Phase Flow Laboratory (BTPFL), Purdue University International Electronic Cooling Alliance (PUIECA), Mechanical Engineering Building, 585 Purdue Mall, West Lafayette, IN 47907; Rolls-Royce Purdue University Technology Center (UTC), Maurice Zucrow Laboratories, 500 Allison Road, Purdue University, West Lafayette, IN 47907 Enhanced Design of Cross-Flow Microchannel Heat Exchanger ...
متن کاملLQ Control Of Heat Exchanger - Design And Simulation
Heat exchangers are devices whose primary responsibility is the transfer (exchange) of heat, typically from one fluid to another. However, they are not only used in heating applications, such as space heaters, but are also used in cooling applications, such as refrigerators and air conditioners. Heat exchange processes often contain time-delay. This paper deals with design of universal and robu...
متن کاملNew Generation of Air Cooled Heat Exchanger 1 kW Module Design Optimization
The objective of this paper is to evaluate and optimize the performance of 1 kW integrated heat exchanger module for new generations of air cooled heat exchangers. The first objective is to minimize the ratio of the header frontal area to the entire heat exchanger frontal which will help to reduce the header size. The second objective is to minimize the pressure drop for the entire heat exchang...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: El-cezeri
سال: 2021
ISSN: ['2148-3736']
DOI: https://doi.org/10.31202/ecjse.909855