Design and Simulation of 3-DOF Reconfigurable Planar Parallel Robot
نویسندگان
چکیده
منابع مشابه
Kinematic calibration of a 3-DOF planar parallel robot
Purpose – The purpose of this paper is to describe a calibration method developed to improve the absolute accuracy of a novel three degrees-of-freedom planar parallel robot. The robot is designed for the precise alignment of semiconductor wafers and, even though its complete workspace is slightly larger, the accuracy improvements are performed within a target workspace, in which the positions a...
متن کاملOn the design of reactionless 3-DOF planar parallel mechanisms
A reactionless machine will not apply reaction forces and moments on the mounting base during motion. This article presents the theory for design of a reactionless planar parallel mechanism. The salient features of this design are: (i) it uses auxiliary parallelograms to locate the center of mass of each leg at the base, (ii) choice of geometric and inertial parameters to satisfy the reactionle...
متن کاملOptimal Kinematic Design of a 2-DOF Planar Parallel Manipulator
Closed-form solutions were developed to optimize kinematics design of a 2-degree-of-freedom (2DOF) planar parallel manipulator. The optimum design based on the workspace was presented. Meanwhile, a global, comprehensive conditioning index was introduced to evaluate the kinematic designs. The optimal parallel manipulator is incorporated into a 5-DOF hybrid machine tool which includes a 2-DOF rot...
متن کاملAccuracy analysis of 3-DOF planar parallel robots
Three-degree-of-freedom planar parallel robots are increasingly being used in applications where precision is of the utmost importance. Clearly, methods for evaluating the accuracy of these robots are therefore needed. The accuracy of well designed, manufactured, and calibrated parallel robots depends mostly on the input errors (sensor and control errors). Dexterity and other similar performanc...
متن کاملDSP+FPGA-Based Multi-Axis Controller for a 3-DOF Planar Parallel Robot
The paper presents a multi-axis motion controller based on DSP (Digital Signal Processor) and FPGA (Field Programmable Gate Array) to meet the communication demands of modern complex control systems. In details, the paper first introduces a design method of the structure of the motion controller which is based on PC. This controller consists of FIFO (First In First Out) circuit block and baud r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2016
ISSN: 2261-236X
DOI: 10.1051/matecconf/20168203004