Design and Research of Stirling Engine Heat Exchange Device

Stirling Solar Engine Design Report

Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses

In this paper, numerical solution of beta-type Stirling engine was presented considering its non-ideal regenerator. To this end, the second-order model including heat and power losses was used. Then, a numerical code was applied for calculating geometrical and physical optimum values of the engine. To confirm the obtained results, the physical and geometrical parameters of the GPU-3 engine were...

Efficiency Bound of a Solar-driven Stirling Heat Engine System

A solar-driven Stirling engine is modelled as a combined system which consists of a solar collector and a Stirling engine. The performance of the system is investigated, based on the linearized heat loss model of the solar collector and the irreverisible cycle model of the Stirling engine affected by finite-rate heat transfer and regenerative losses. The maximum efficiency of the system and the...

Conceptual Design of Scroll Expander-Compressor for Stirling Engine

Conceptual design of scroll expander and scroll compressor for 10 kW-class Stirling engine utilizing solar energy as heat source has been carried out. CO2 was chosen as the working fluid, since it is nontoxic, inflammable and it has relatively higher density among probably usable gases. Gas temperature at the expander inlet was set at 700 C, and that at the compressor inlet was at 40°C. System ...

Multi-objective Optimization of Stirling Heat Engine Using Gray Wolf Optimization Algorithm (TECHNICAL NOTE)

The use of meta-heuristic optimization methods have become quite generic in the past two decades. This paper provides a theoretical investigation to find optimum design parameters of the Stirling heat engines using a recently presented nature-inspired method namely the gray wolf optimization (GWO). This algorithm is utilized for the maximization of the output power/thermal efficiency as well as...