DESIGN AND PRODUCTION OF POLYMERIC STRUCTURAL ULTRA LIGHTWEIGHT CONCRETE WITH ESKANDAN REGION PUMICE
نویسندگان
چکیده
منابع مشابه
Investigation of mechanical and durability properties of lightweight concrete containing Pumice
In this research, the effect of the cement, sand, and pumice mixture on the durability of lightweight concrete is investigated. The intention of this paper is to replace a certain amount of the pumice percentage as an alternative option of the cement and pumice sand aggregate with conventional sand components. The experimental results include compressive strength, ion-chloride emission factor (...
متن کاملMaterials, Production, Properties and Application of Aerated Lightweight Concrete: Review
Aerated lightweight concrete have many advantages when compared with conventional concrete such as advanced strength to weight ratio, lower coefficient of thermal expansion, and good sound insulation as a result of air voids within aerated concrete. This paper is attention to classified of aerated lightweight concrete into foamed concrete and autoclaved concrete. Also, it is exhibits the raw ma...
متن کاملInfluence of Nano-silica and Polypropylene Fibers on Bond Strength of Reinforcement and Structural Lightweight Concrete (RESEARCH NOTE)
In this study, first by surveythe parameters affecting the compressive strength, such as water to cement ratio, cementgrade, silica fume to cement percentage, and the various ratios oflight weight aggregate LECA, to total aggregate, Taguchi method is used, to test 9 mix designsobtained the mix design optimization. Since lightweight concrete is brittle like normal concrete, to resolve this probl...
متن کاملPrediction of Lightweight Aggregate Concrete Compressive Strength
Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method. One of the main methods of non-destructive testing in the assessment of compressive strength...
متن کاملLightweight Geopolymer Concrete with EPS Beads
Activation of class F fly ash with the 10 M sodium hydroxide and sodium silicate and its geopolymeric products were analysed under quasi-isothermal mode of DSC, FTIR and TG/DTA techniques. Before adding in concrete, expanded polystyrene beads were prewetted with the styrenebutadienestyrene latex aimed at to improve their bonding with geopolymer. Lightweight mortars/concretes were made from geop...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Conference on Civil and Architecture Engineering
سال: 2010
ISSN: 2636-4387
DOI: 10.21608/iccae.2010.45095