Design and Manufacture of High-Performance Hydrostatic Air Bearing Spindle with Grid-Shaped Grooves.
نویسندگان
چکیده
منابع مشابه
Transmittance of MIM Waveguides Containing Semi-Circular Ring Shaped and Rectangular Ring Shaped Grooves
In this paper the transmittance of metal-insulator-metal (MIM) waveguides containing semi-circular ring shaped and rectangular ring shaped grooves are investigated. By varying groove parameters their effects on the transmittance of the MIM waveguides are investigated. The results show that the transmittance spectra of the waveguides have maximum and minimum points, and by using appropriate para...
متن کاملThe Critical Speeds of a Machine Tool Spindle- Bearing System with the High Stiffness Hydrostatic Journal Bearings
INTRODUCTION The ordinary hydrodynamic bearings have been replaced by the hydrostatic bearings in the application of machine tools in recent years. For the hydrodynamic bearings, the journal and the bearing surface are separated by the sliding action with a wedge pressure-generating mechanism to develop a pressure within the bearing. It has advantages of simple structure and cheap cost. However...
متن کاملAn All-Solid-State Fiber-Shaped Aluminum-Air Battery with Flexibility, Stretchability, and High Electrochemical Performance.
Owing to the high theoretical energy density of metal-air batteries, the aluminum-air battery has been proposed as a promising long-term power supply for electronics. However, the available energy density from the aluminum-air battery is far from that anticipated and is limited by current electrode materials. Herein we described the creation of a new family of all-solid-state fiber-shaped alumi...
متن کاملComparison of Bearings --- For the Bearing Choosing of High-speed Spindle Design
There are many types of bearings available, each used for different purposes and different conditions. Two major types of bearings are contact bearings and noncontact bearings. By considering the ball material, I separate the contact bearings to steel bearings and ceramic ball bearings. On the other hand, there are bearings that can run without any contact between the sliding surfaces in the be...
متن کاملdesign and manufacture of clutch pedal linkage with clutch cable
an interface part is used between clutch pedal and clutch cable in peugeot, samand, rd and peugeot pars. this part is consisted of two pieces. the main body is made of polyamide 6.6 and the second part is made of ck45.due to the fact that the two pieces are made of different assembling geometry with respect to each other, therefore, has caused performance problems which may result in clutch cab...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1995
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.61.220