DESIGN AND MANUFACTURE OF AN ANGLE ADJUSTABLE CRUTCH WITH KENNEDY KEY MECHANISM
نویسندگان
چکیده
منابع مشابه
design of an analog fuzzy logic controller chip
fuzzy logic has been developed over the past three decades into a widely applied techinque in classification and control engineering. today fuzzy logic control is one of the most important applications of fuzzy set theory and specially fuzzy logic. there are two general approachs for using of fuzzy control, software and hardware. integrated circuits as a solution for hardware realization are us...
15 صفحه اولdesign of an analog ram (aram)chip with 10-bit resolution and low-power for signal processing in 0/5m cmos process
برای پردازش سیگنال آنالوگ در شبکه های عصبی ، معمولا نیاز به یک واحد حافظه آنالوگ احساس میشود که بدون احتیاج به a/d وd/a بتواند بطور قابل انعطاف و مطمئن اطلاعات آنالوگ را در خود ذخیره کند. این واحد حافظه باید دارای دقت کافی ، سرعت بالا ، توان تلفاتی کم و سایز کوچک باشد و همچنین اطلاعات را برای زمان کافی در خود نگهدارد. برای پیاده سازی سیستمی که همه این قابلیتها را در خود داشته باشد، کوشش...
15 صفحه اولdesign and manufacture of clutch pedal linkage with clutch cable
an interface part is used between clutch pedal and clutch cable in peugeot, samand, rd and peugeot pars. this part is consisted of two pieces. the main body is made of polyamide 6.6 and the second part is made of ck45.due to the fact that the two pieces are made of different assembling geometry with respect to each other, therefore, has caused performance problems which may result in clutch cab...
متن کاملThe design of a compliant composite crutch.
Ambulation by crutches takes up to twice the energy of normal gait and can lead to injuries of the hands and arms. The compliant composite forearm crutch described in this article seeks to address these problems. The new crutch is made of a single composite piece and has an S-curve in the main body to provide shock absorption and return of energy with the goal of reducing impact and repetitive ...
متن کاملBiomechanical Evaluation of Crutch Design Variations
The purpose of the study is to evaluate variations in the forces and moments applied to both the axillary (armpit) pad and handgrip of standard axillary crutches. The modified axillary pad was tapered in the front rather than symmetric and the modified handgrip was angled to about 17° rather than horizontal. The crutches used could be fitted with the standard or novel versions of both the axill...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Research in Engineering and Technology
سال: 2015
ISSN: 2321-7308,2319-1163
DOI: 10.15623/ijret.2015.0405015