Design and Integration of Beyond-10MHz High Switching Frequency DC-DC Converter
نویسندگان
چکیده
There are continuous and strong demands for the DC-DC converter to reduce size of passive components increase system power density. Advances in CMOS processes GaN FETs enabled switching frequency converters be beyond 10MHz. The advancements 3-D integrated magnetics will further footprint. In this paper, overview beyond-10MHz provided first, our recent achievements introduced focusing on 3D-integration Fe-based metal composite magnetic core inductor, FET control designs.
منابع مشابه
High Frequency Dc-dc Converter Design Using Zero Voltage Switching
Resonant mode conversion techniques are used nowadays to improve pulse width modulated dcdc converters. Moreover the quest for ever smaller 50 to 500 watts dc-dc switching supplies has led to the development of circuits that operates in 500 KHz -1 MHz range and above. Since the parasitic elements that normally present in a power circuit can be very significant at this frequency, most of the wor...
متن کاملDigital Control Design and Implementation of a DSP Based High-Frequency DC-DC Switching Power Converter
This paper presents a DSP based digital control design and implementation of a high frequency dc-dc switching power supply. Starting with a dc-dc buck converter and a given set of performance specifications, different control blocks and parameters, used as in the analog control design approach, are reviewed prior to the control design in digital domain. The control loop is then analyzed and the...
متن کاملDesign and Implementation of a Digital PWM Controller for a High-Frequency Switching DC-DC Converter
This paper describes complete design and implementation of a digital controller for a high-frequency switching power supply. Guidelines for the minimum required resolution of the analog-to-digital converter, the pulse-width modulator, and the fixed-point computational unit are derived. A design example based on a buck converter operating at the switching frequency of 1MHz is presented. The cont...
متن کاملLinear-Assisted DC-DC Switching Converter with Constant Switching Frequency
This article shows the proposal of a linear–assisted converter or linear–&–switching hybrid converter with a constant switching frequency. The control loop of the system is based on the current–mode technique. The main disadvantage of a converter with current–mode control is the inherent instability of the loop when switch duty ratios are greater than 0.5. In order to make stable the proposed l...
متن کاملSliding Mode Control of a Bidirectional Buck/Boost DC-DC Converter with Constant Switching Frequency
In this paper, sliding mode control (SMC) for a bidirectional buck/boost DC-DC converter (BDC) with constant frequency in continuous conduction mode (CCM) is discussed. Since the converter is a high-order converter, the reduced-order sliding manifold is exploited. Because of right-half-plan zero (RHPZ) in the converter’s duty ratio to output voltage transfer function, sliding mode current...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEICE Transactions on Electronics
سال: 2022
ISSN: ['0916-8524', '1745-1353']
DOI: https://doi.org/10.1587/transele.2021cti0001