Design and Implementation of UWB Antenna with Dual Band Rejection Characteristics for Mobile Handset
نویسندگان
چکیده
منابع مشابه
A Compact Uwb Antenna with Dual Band Rejection
In this communication, a new compact UWB monopole antenna with dual band rejection is presented. The antenna is designed using FR4 substrate with dielectric constant 4.4, loss tangent 0.02 and a height of 1.59 mm. Initially the UWB antenna is designed to obtain a 153% fractional bandwidth from 2.4 GHz–21.7GHz. The ground plane beneath the patch is etched out and a rectangular slot is introduced...
متن کاملA Dual Band (WLAN/WIMAX) Rejection UWB Antenna Using CSRRS
A compact microstrip-fed ultra-wideband (UWB) planar monopole antenna with dual band rejected characteristic is presented in this paper. By etching two identical complementary square split ring resonators (CSRRs) in the radiation patch, dual band rejections in the WiMAX and WLAN bands are achieved. The proposed antenna, with the size of 30×34mm2, has been design. And the simulated results show ...
متن کاملPrinted Square-shape UWB Antenna with Dual Band-Notched Characteristics
Ultra Wideband (UWB) is a new emerging and promising technology as it can accommodate higher data over a large bandwidth. we proposed a Printed Square-shape UWB Antenna With Dual Band-Notched Characteristics. A simple square patch antenna has been fed through a 50 Ω microstrip feedline .A rectangular notch has been etched on the ground plane to reject the interference of WIMAX Band (3GHZ-4.7GHZ...
متن کاملImplementation and investigation of circular slot UWB antenna with dual-band-notched characteristics
The design and analysis of an ultra wideband aperture antenna with dual-band-notched characteristics are presented. The proposed antenna consists of a circular ring exciting stub on the front side and a circular slot on the back ground plane. By utilizing a parasitic strip and a T-shaped stub on the antenna structure, two notched bands of 850 MHz (3.5-4.35 GHz) and 900 MHz (5.05-5.95 GHz) are a...
متن کاملDesign, Simulation and implementation of active dual-band dipole antenna using a series stub
In this paper, a new method for designing an active dual-band dipole antenna is proposed. The operating frequencies of the proposed antenna are 150 and 450 MHz that are usually used in military applications. Using a series stub is the main idea in the proposed dual-band antenna, where it makes an independent resonance frequency higher than the main resonance frequency of a conventional dipole. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of IKEEE
سال: 2016
ISSN: 1226-7244
DOI: 10.7471/ikeee.2016.20.1.068