Design and Implementation of Quad-Element Super-Wideband MIMO Antenna for IoT Applications
نویسندگان
چکیده
منابع مشابه
Design and Implementation of a Compact Super-Wideband Printed Antipodal Antenna Using Fractal Elements
A compact printed fractal antipodal bow-tie antenna is designed and implemented to simultaneously cover the operations in the C, X, and Ku-bands. It is demonstrated that by addition of small fractal elements at the sides of hexagonal arms of the bow-tie, a wide operating frequency range of 3.3 to 19.1 GHz can be covered while antenna size is only 30×34×1.2 mm3. In order to match the antenna to ...
متن کاملdesign of a novel directional microstrip-fed super-wideband antenna
in this paper, a novel directional super wide band micro strip antenna based on a simple and new geometry has been proposed. the antenna exhibits the widest bandwidth ever reported to the authors’ knowledge from 50 ghz to 200 ghz. its radiation pattern is approximately steady in the frequency ranges of 50 ghz to 200 ghz. the antenna consists of a club-like radiating patch, a combination of thre...
متن کاملDesign of a Compact Wideband Mimo Antenna for Mobile Terminals
A new broadband multiple-input multiple-output (MIMO) antenna with good isolation and compact size is proposed. The proposed antenna consists of two G-shaped elements in the upper layer and two inverted L protrude branches and a T slot etched in ground which is used to reduce the mutual coupling. This planar antenna has a bandwidth of 100% with |S11| ≤ −10 dB from 2.26 to 6.78GHz. The value of ...
متن کاملDesign of a Wideband Microstrip Antenna for Mobile Handset Applications
This article summarizes the design, construction and experimental results for a new wideband miniaturized antenna operating in the 1.9 GHz band. This antenna is intended for handset applications, and may also be used as an element in a larger array. Using shorting pins at the zero-potential plane, a compact antenna with a 21 percent bandwidth was designed and tested, with quite good agreement b...
متن کاملDesign of Temple Shape Slot Antenna for Ultra Wideband Applications
A novel design of a temple shaped printed slot antenna for circular polarization applications is presented in this paper. The slot, half trapezoidal and half semi-circular in shape, is excited by a 50 Ω CPW feed terminated with a tuning stub. Modifications of the initial design for improving return loss and circular polarization characteristics are proposed and discussed. The antenna is very co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2020
ISSN: 2169-3536
DOI: 10.1109/access.2020.3045534