Design and Implementation of a Soft-Switching Converter With High Step-Up Ratio
نویسندگان
چکیده
The main purpose of this paper is the development a DC/DC boost converter with high conversion efficiency. proposed has step-up ratio and equipped soft-switching technology. inductor used in developed coupled rather than general inductor, therefore, voltage can be improved, so that characteristics power switch obtained within same duty cycle. connected to resonance branch circuit traditional converter, able achieve zero-voltage switching (ZVS) using simple signal control reduce loss caused by hard method thereby improving To verify performance analysis on first performed, proceed designing each component circuit. Then, feasibility verified PSIM simulation software. Finally, actualize TMS320F2809 digital processor (DSP), indeed switch, efficiency reach as 91% when under full load 300W, proof truly excellent performance.
منابع مشابه
Design of a non-isolated multi-input converter with soft switching and high step-up voltage gain
Energy is one of the most important factors for the economic growth and development of each country. Most of the energy is consumed in the form of electricity. One of the most important ways to generate electricity is to produce electricity through fossil fuels. However, due to their disadvantages such as limitations and concerns about the environment and increased demand for energy, engineers ...
متن کاملAn Efficient High-Step-Up Soft-Switching Boost Converter for Photovoltaic Application
In this paper an efficient high step-up converter with a coupled- inductor with soft- switching operation is presented. The proposed topology includes a coupled-inductor boost converter for raising the voltage gain. Moreover, a simple auxiliary resonant circuit composed of an auxiliary switch, a clamping diode and a resonant tank (inductor, capacitor), is adopted in this paper. The coupled-indu...
متن کاملDesign & Implementation of Soft Switching Dc-dc Converter with High Voltage Gain for High Power Application
A zero voltage switching (ZVS) dc–dc converter with high voltage gain is proposed. It consists of a ZVS boost switch cell converter stage and a ZVS half-bridge converter stage with resonant converter and all these stages are merged into a single stage. The ZVS boost converter stage provides a continuous input current and ZVS operation of the power switches. The ZVS halfbridge converter stage pr...
متن کاملAn Interleaved Configuration of Modified KY Converter with High Conversion Ratio for Renewable Energy Applications; Design, Analysis and Implementation
In this paper, a new high efficiency, high step-up, non-isolated, interleaved DC-DC converter for renewable energy applications is presented. In the suggested topology, two modified step-up KY converters are interleaved to obtain a high conversion ratio without the use of coupled inductors. In comparison with the conventional interleaved DC-DC converters such as boost, buck-boost, SEPIC, ZETA a...
متن کاملDesign and Implementation of Step Up DC-DC Converter with a Cascaded Quasi-Z Source Network
This paper proposes a new topology of quasiZ-source inverter(qZSI) which is used as step-up isolated dc/dc converter for residential fuel cell (FC) power systems .The proposed topology used is cascaded quasi Z source inverter and implemented using induction motor. The cascaded qZSI is derived by the adding of one diode, one inductor and two capacitors to the traditional qZSI. The proposed two-s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2023
ISSN: ['2169-3536']
DOI: https://doi.org/10.1109/access.2023.3276649