DESIGN AND FABRICATION OF RF-MEMS SWITCH FOR V-BAND RECONFIGURABLE APPLICATION
نویسندگان
چکیده
منابع مشابه
Design and Fabrication of Rf-mems Switch for V-band Reconfigurable Application
This paper presents a study of RF MEMS switch designed to be integrated in tunable filters for applications from W-frequency band to V-frequency band. Along the whole process, we go into detail of each procedure to present a complete study from design to fabrication and characterization of a RF-MEMS switch. The proposed concepts are validated by experimental results.
متن کاملDesign and fabrication of a single membrane push-pull SPDT RF MEMS switch
In this paper, we report a new push-pull-type SPDT (single pole double throw) switch actuated by the combination of electromagnetic and electrostatic forces for low power and low voltage operation. The switch is initially actuated by large electromagnetic force to change its state and is held to maintain its state by applying electrostatic force to reduce static power consumption. The electroma...
متن کاملDesign and Fabrication of RF MEMS Switch by the CMOS Process
This work investigates the fabrication of a RF (ratio frequency) MEMS (micro elector mechanical system) switch using the standard 0.35 m 2P4M (double polysilicon four metal) CMOS (complementary metal oxide semiconductor) process and the post-process. The switch is a capacitive type, which is actuated by an electrostatic force. The structure of the switch consists of a CPW (coplanar waveguides) ...
متن کاملDesign and simulation of a RF MEMS shunt capacitive switch with low actuation voltage, low loss and high isolation
According to contact type, RF MEMS switches are generally classified into two categories: Capacitive switches and Metal-to-Metal ones. The capacitive switches are capable to tolerate a higher frequency range and more power than M-to-M switches. This paper presents a cantilever shunt capacitive RF MEMS switch with characteristics such as low trigger voltage, high capacitive ratio, short switchin...
متن کاملDesign, Analysis, and Verification of Ka-Band Pattern Reconfigurable Patch Antenna Using RF MEMS Switches
Abstract: This paper proposes a radiating pattern reconfigurable antenna by employing RF Micro-electromechanical Systems (RF MEMS) switches. The antenna has a low profile and small size of 4 mm× 5 mm× 0.4 mm, and mainly consists of one main patch, two assistant patches, and two RF MEMS switches. By changing the RF MEMS switches operating modes, the proposed antenna can switch among three radiat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research B
سال: 2012
ISSN: 1937-6472
DOI: 10.2528/pierb12021404