Design and fabrication of pool cooled helical coil as an R&D program for Large Helical Device
نویسندگان
چکیده
منابع مشابه
Development and Fabrication of Folded Waveguide Antenna for the Large Helical Device
We report a development and fabrication of an folded waveguide (FWG) antenna to produce and heat the plasma via ion Bernstein wave on the Large Helical Device (LHD) in the ion cyclotron range of frequency (ICRF). This antenna is 428 mm in height, 1050 mm in width and 3950 mm in length with 23 vanes and 24 folds. It will be installed to the horizontal vacuum port with an inclination angle of 38....
متن کاملInfrared imaging video bolometer for the large helical device
A new type of infrared imaging bolometer, known as the infrared imaging video bolometer ~IRVB! has been under development at the National Institute of Fusion Science ~NIFS! over the last year. A prototype of this diagnostic has been designed and constructed at NIFS and installed on the large helical device ~LHD! and successfully operated. This diagnostic utilizes a 6639030.001 mm gold foil moun...
متن کاملAchievements and Continued New Phase of the Large Helical Device
This paper reviews major achievements in the large helical device (LHD) project and discusses the prospects in the upcoming nearest future. The LHD is the largest magnetic confinement device among diversified helical systems and employs superconducting coils. These significant features have enabled comprehensive studies on steady-state net-current free plasmas with plasma parameters comparable ...
متن کاملFull thickness advancement flap to reconstruct large helical rim
Introduction: Auricular reconstruction of partial ear defects is usually challenging, especially in extended resections or traumas. Helical rim is the most noticeable part of ear with aesthetic significance, which demands detailed procedures. Helical rim advancement is a known procedure to reshape lacerated rim. In the original technique, a chondrocutaneous flap is raised in order to preserve t...
متن کاملDesign of Correcting Mirrors for a Gyrotron Used at Large Helical Device
We report the design of a mirror correcting system used at the Large Helical Device (LHD) to convert the output radiation of the CPI 84 GHz gyrotron into the HE11 mode of a corrugated waveguide transmission line. The radiation pattern of the gyrotron is measured using an IR camera at LHD. The measured data is analyzed at MIT to retrieve the phase distribution of the radiation. The moments of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Magnetics
سال: 1991
ISSN: 0018-9464,1941-0069
DOI: 10.1109/20.133691