Design and Fabrication of Kidney Phantoms for Internal Radiation Dosimetry Using 3D Printing Technology
نویسندگان
چکیده
منابع مشابه
Design and Fabrication of Kidney Phantoms for Internal Radiation Dosimetry Using 3D Printing Technology.
Currently, the validation of multimodal quantitative imaging and absorbed dose measurements is impeded by the lack of suitable, commercially available anthropomorphic phantoms of variable sizes and shapes. To demonstrate the potential of 3-dimensional (3D) printing techniques for quantitative SPECT/CT imaging, a set of kidney dosimetry phantoms and their spherical counterparts was designed and ...
متن کاملInternal dosimetry estimates using voxelized reference phantoms for thyroid agents
This work presents internal dosimetry estimates for diagnostic procedures performed for thyroid disorders by relevant radiopharmaceuticals. The organ doses for (131)Iodine, (123)Iodine and (99m)Tc incorporated into the body were calculated for the International Commission on Radiological Protection (ICRP) reference voxel phantoms using the Monte Carlo transport method. A comparison between diff...
متن کاملPediatric radiation dosimetry for positron-emitting radionuclides using anthropomorphic phantoms.
PURPOSE Positron emission tomography (PET) plays an important role in the diagnosis, staging, treatment, and surveillance of clinically localized diseases. Combined PET/CT imaging exhibits significantly higher sensitivity, specificity, and accuracy than conventional imaging when it comes to detecting malignant tumors in children. However, the radiation dose from positron-emitting radionuclide t...
متن کاملInternal dosimetry of radioiodine using ICRP reference phantoms and updated biokinetic model
The purpose of this study is to estimate internal dose to human body due to administration of I-131 using new biokinetic model of iodine. In this respect, we used international commission on radiological protection (ICRP) adult reference phantoms. Monte Carlo calculations were performed using MCNPX 2.6 code. The average dose to target organ per disintegration inside source organ, namely S facto...
متن کاملFreeform fabrication of nanobiomaterials using 3D printing
Nanobiomaterials play an important role in nanobiotechnology and have made a great contribution to biomedical research and healthcare. Recent progress in nanobiomaterials has increased demand for multidisciplinary approaches from physical, biological and engineering sciences. Solid freeform fabrication (SFF) technologies are based on layer-by-layer deposition of materials which bring about new ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Medicine
سال: 2016
ISSN: 0161-5505,2159-662X
DOI: 10.2967/jnumed.116.178046