Design and Fabrication of Array antenna in the WLAN Band
نویسندگان
چکیده
منابع مشابه
Design and Fabrication of Plasma Array Antenna with Beam Forming
In this paper, the design and implementation of plasma antenna array with beam forming is discussed. The structure consists of a circular array of plasma tube enclosed in a unipolar UHF band monopole antenna. Beam forming is possible by stimulated plasma tubes. The combination of the above antenna with plasma excitation controller makes a beam forming smart antenna. An experimental model in UHF...
متن کاملDesign of A Compact CPW-FED UWB Antenna with WiMAX and WLAN Band-Notched Characteristic Evaluated in AHP Framework
In this article, we present a new design of a coplanar waveguide fed (CPW-fed) ultra-wideband (UWB) antenna with dual band-notched characteristics. Two notched frequency bands are achieved by using two inverted U-shaped stepped impedance resonators. The proposed antenna can operate from 2.82 to 11 GHz (118%), defined by VSWR< 2, except two notched bands around 3.5 GHz (WiMAX) and 5.5 GHz (WLAN)...
متن کاملDesign, simulation and Fabrication of Circularly Polarized Fabry-Perot Antenna for Ku Band
This paper deals with the design and simulation of a RHCP Fabry-Perot antenna for 14.5 GHz. Based on transmission line model, partially Reflecting Surface (PRS) was designed so thatgain enhancement and circular polarization simultaneously obtained. PRS consist of a square loop and meander-line at the top and bottom respectively. In order to achieve the resonance condition in orthogonal componen...
متن کاملdesign, simulation and fabrication of 2x2 microstrip patch antenna array fed by substrate integrated waveguide at x band
this paper describes the design of a 2x2 micro strip patch antenna array in the frequency of 9.5ghz for radar applications, using substrate integrated waveguide, siw, for feeding network. the micro strip patches are aperture-coupled with the feeding network of siw. the feeding network consisting of a perpendicular coax-to-siw transition and two y-junction power dividers. the antenna is simulate...
متن کاملDesign of Single Band Rectangular Patch Antenna for WLAN Application
A microstrip patch antenna for WLAN application is proposed. The antenna has a frequency bandwidth of 196 MHz (5103MHz 5300 MHz). The microstrip antenna has a planar geometry and consists of a ground, a substrate, a patch and a feed. The basic theory and design are analyzed, and simulation using CST Microwave Studio commercial software is employed to optimize the antenna's properties. Results s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea Academia-Industrial cooperation Society
سال: 2012
ISSN: 1975-4701
DOI: 10.5762/kais.2012.13.2.779