Design and fabrication of a personalized anthropomorphic phantom using 3D printing and tissue equivalent materials
نویسندگان
چکیده
منابع مشابه
Design of homogeneous and heterogeneous human equivalent thorax phantom for tissue inhomogeneity dose correction using TLD and TPS measurements
Background: The purpose of this study is to fabricate inexpensive in-house low cost homogeneous and heterogeneous human equivalent thorax phantom and assess the dose accuracy of the Treatment Planning Systems (TPS) calculated values for different lung treatment dosimetery. It is compared with Thermoluminescent Dosimeter (TLD) measurement. Materials and Methods: Homogeneous and heterogeneous tho...
متن کاملDesign and Production of Two-Piece Thyroid-Neck Phantom by the Concurrent Use of Epoxy Resin and Poly(Methyl Methacrylate) Soft Tissue Equivalent Materials
The aim of this report is to present a new two-piece thyroid-neck phantom produced by the concurrent use of epoxy resin and poly(methyl methacrylate) (PMMA: plexiglass) soft tissue equivalent materials. Accordingly, mass attenuation coefficients of the epoxy resin and the plexiglass compounds were obtained from simulation (NIST XCOM 3.1) and measurements (practical dosimetry) and compared to th...
متن کاملon the equivalence of constructed-response and multiple-choice : stem-equivalent, stem non-equivalent but content equivalent, and stem and content non-equivalent items in reading comprehension using multifaceted rasch
the present study investigated construct equivalence of multiple choice (mc) and constructed response (cr) item types across stem and content equivalent mc and cr items (item type ‘a’), non-stem-equivalent but content equivalent mc and cr items (item type ‘b’), and non-stem and non-content equivalent mc and cr items (item type ‘c’). one hundred seventy english-major undergraduates completed mc ...
Design and Fabrication Process of MTF Phantom CT Scan
Introduction: One of the main steps in the optimization process in diagnostic imaging is the quality control of radiology devices. The usual method of CT scan calibration is used of a phantom. The phantom created a certain weakening for the radiation through which it passes. One of the most suitable methods for quantitative analysis of the resolution and contrast in CT scan im...
متن کاملDesign and fabrication of a realistic anthropomorphic heterogeneous head phantom for MR purposes
OBJECTIVE The purpose of this study is to design an anthropomorphic heterogeneous head phantom that can be used for MRI and other electromagnetic applications. MATERIALS AND METHODS An eight compartment, physical anthropomorphic head phantom was developed from a 3T MRI dataset of a healthy male. The designed phantom was successfully built and preliminarily evaluated through an application tha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Quantitative Imaging in Medicine and Surgery
سال: 2019
ISSN: 2223-4292,2223-4306
DOI: 10.21037/qims.2018.08.01