Design and Fabrication of a Multi-Purpose Homogenizer
نویسندگان
چکیده
منابع مشابه
Design and fabrication of a multi-purpose soft x-ray array diagnostic system for KSTAR.
A multi-purpose soft x-ray array diagnostic system was developed for measuring two-dimensional x-ray emissivity profile, electron temperature, Ar impurity transport, and total radiation power. A remotely controlled filter wheel was designed with three different choices of filters. The electron temperature profile can be determined from the ratio of two channels having different thickness of Be ...
متن کاملa study on the design of bio-ethanol process from date wastes of sistan and baluchistan province
اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...
Design and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملDESIGN AND FABRICATION OF A SOPHISTICATED VERNEUIL SYSTEM
Abstract: fabricated. Modifications carried out in different parts of the old system in order to control mostof the growth parameters with more accuracy. The fabricated system was used to grow sapphiresingle crystals with almost 10 mm in diameter and 50 mm in length. The crystallinity andstructure of the grown crystals were characterized by computer aided single crystal X-raydiffraction techniq...
متن کاملDesign and fabrication of a prototype planar undulator
The main goal of this work is to get the fabrication technology of the insertion devices. A prototype undulator with the period of 48mm and the peak magnetic field of 0.75 T has been fabricated using NdFeB-SH35 magnets based on the cooperation between ILSF and NSTRI. The total magnet length is 483 mm and the number of periods is 8. The magnetic parameters of the undulator are determined in orde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPES Journal of Science and Technology Research
سال: 2020
ISSN: 2682-5821
DOI: 10.37933/nipes/2.3.2020.4