Design and fabrication of a broadband polarization and temperature insensitive arrayed waveguide grating on InP
نویسندگان
چکیده
منابع مشابه
20GHz Channel Spacing InP-based Arrayed Waveguide Grating
We demonstrate a 10-channel InP-based Arrayed-Waveguide Grating (dimensions = 5.0x6.0 mm) with a 20-GHz channel spacing. The excess loss of the AWG is 5.5-6.3 dB, and the crosstalk level is below -15 dB. Introduction Arrayed waveguide Gratings (AWGs) are one of the key components for wavelength division multiplexing (WDM) applications, and narrowchannel-spacing AWG multi/demultiplexers are indi...
متن کاملArrayed Waveguide Grating Router
This paper discusses design, fabrication, and characterization of a 512 × 512 arrayed waveguide grating router (AWGR) with a channel spacing of 25 GHz. The dimensions of the AWGR is 16 mm × 11 mm and is fabricated on a 250 nm silicon-on-insulator platform. The measured channel crosstalk is approximately −4 dB without any compensation for the phase errors in the arrayed waveguides. The AWGR spec...
متن کاملDesign of FBG Demodulation System Based on Arrayed Waveguide Grating
Array waveguide grating(AWG) is a kind of role scattered light passive device base on the plane wave circuit technology. A broadband laser beam can be divided into multibeam laser light by wavelength. In this paper, the characteristics of AWG are used and based on previous studies. Using an array waveguide grating fiber Bragg grating (FBG) demodulation method, and the mathematical model of FBG ...
متن کاملDesign of a High Index Contrast Arrayed Waveguide Grating
Arrayed waveguide gratings are useful structures for the implementation of wavelength division multiplexing; however, in their current form, silica-based gratings are too large to be made cheaply or to use as an integrated component. This paper describes a Master of Engineering thesis which will attempt to design such a structure which is at least one order of magnitude smaller than the best on...
متن کاملDesign of Arrayed Waveguide Grating based Optical Switch for High Speed Optical Networks
This paper demonstrates the design of an Arrayed Waveguide Gratings (AWG) based optical switch. In the design both physical and network layer analysis is performed. The physical layer power and noise analysis is done to obtain Bit Error Rate (BER). This has been found that at the higher bit rates, BER is not affected with number of buffer modules. Network layer analysis is done to obtain perfor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2005
ISSN: 1094-4087
DOI: 10.1364/opex.13.005535