Design and fabrication of a 6db compact directional coupler
نویسندگان
چکیده
منابع مشابه
Design of a 6db Directional Coupler Using Defected Ground Structure
This paper presents the design of 6dB directional coupler in C-band. A defected ground structure is used underneath the coupled region in order to relax the requirement for a narrow slot between the coupled lines. The simulated results show that the designed coupler exhibits a coupling of 6±0.1dB across the band 4.0 GHz to 4.5 GHz, when the spacing between the coupled lines is larger than 0.1 m...
متن کاملMoM Analysis and Design of a Compact Coaxial-to-Microstrip Directional Coupler
In order to overcome the main drawbacks of coaxial, waveguide, and stripline couplers, the analysis and the design of a compact coaxial-to-microstrip directional coupler convenient for power and antenna control application, are presented using the method of moments (MoM) in two dimensions. This technique is adapted to study the complex configuration of the line’s system, which does not have a s...
متن کاملCompact low loss and broadband hybrid plasmonic directional coupler.
We propose a novel broadband coupler for silicon photonics using a hybrid plasmonic waveguide section. The hybrid plasmonic waveguide is used to create an asymmetric section in the middle of a silicon nanowire waveguide coupler to introduce a phase delay to allow for a 3-dB power coupling ratio over a 150 nm bandwidth around 1.55 µm. The device is very compact (<8.5 µm) and has a low insertion ...
متن کاملDesign of a Compact X-Band Substrate Integrated Waveguide Directional Coupler
Abstract— This paper presented the design of four-port network directional coupler at X-band frequency (8.2-12.4 GHz) by using substrate integrated waveguide (SIW) technique. SIW appears few years back which provides an excellent platform in order to design millimeter-wave circuits such as filter, antenna, resonator, coupler and power divider. It offers great compensation for smaller size and c...
متن کاملDesign and Fabrication of Directional Coupler Type Hollow Waveguide Optical Switch with Variable Air Core
We present a device design and fabrication of a novel hollow-waveguide optical switch consisting of a directional coupler with variable air cores. The numerical simulation and experimental characterization of the proposed optical switch performance is discussed. Switching operation is achieved by mode-field change and coupling beat length in the directional coupler section, as the air core thic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sustainable Engineering and Innovation
سال: 2021
ISSN: 2712-0562
DOI: 10.37868/sei.v3i2.id133