Design and Fabrication of 1700 V Emitter Switched Thyristor
نویسندگان
چکیده
منابع مشابه
,024 X 1,024 Resistive Emitter Array Design & Fabrication Status
Santa Barbara Infrared (SBIR) is producing a high performance 1,024 x 1,024 Large Format Resistive emitter Array (LFRA) for use in the next generation of IR Scene Projectors (IRSPs). LFRA requirements were developed through close cooperation with the Tri-Service IR Scene Projector working group, and through detailed trade studies sponsored by the OSD Central T&E Investment Program (CTEIP) and a...
متن کاملDesign and fabrication of three axes accelerometer
Technology can provide safety in physical practices and improving the performance of these activities, so manufacturing of equipments for these purposes has been considered widely. The aim of the present paper was design and fabrication of three-axis accelerometer. hree acceleration sensors, three gyroscopes for angular velocity measurement, a microcontroller for converting analog data to ...
متن کاملDesign, Fabrication and Characterization of Molybdenum Field Emitter Arrays (Mo-FEAs)
We report on the fabrication of highly uniform field emitter arrays (FEAs) with an integrated self-aligned extraction gate from bulk molybdenum. All critical dimensions of the emitter tip were determined by a single process step of Inductively Coupled Plasma (ICP) etching. In addition, the height difference between the emitter tip and the gate plane was controlled by the thickness of the SiO2 d...
متن کاملFabrication of an Omnidirectional 2D Photonic Crystal Emitter for Thermophotovoltaics
In a thermophotovoltaic (TPV) system, a heat source brings an emitter to incandescence and the spectrally confined thermal radiation is converted to electricity by a low-bandgap photovoltaic (PV) cell. Efficiency is dominated by the emitter’s ratio of in-band emissivity (convertible by the PV cell) to out-of-band emissivity (inconvertible). Two-dimensional photonic crystals (PhCs) offer high in...
متن کاملDesign and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Institute of Electrical and Electronic Material Engineers
سال: 2010
ISSN: 1226-7945
DOI: 10.4313/jkem.2010.23.3.183