Design and development of plasma antenna for wi-fi application
نویسندگان
چکیده
منابع مشابه
Novel Wi-Fi Antenna Design and Measurement
A high performance monopole antenna fabricated using a folded wire line and metal patch as radiator is presented. A prototype of the proposed monopole antenna with a compact area size is implemented, and the multi-band WLAN antenna shows a wide operating bandwidth of about 530MHz and 3400MHz for low band and high band, bandwidth, making it easy to cover the IEEE 802.11a, IEEE 802.11b, IEEE 802....
متن کاملDesign of a Yagi-uda Antenna with Gain and Bandwidth Enhancement for Wi-fi and Wi-max Applications
There are various patch antennas used for Wi-Fi and Wi-MAX applications. But, the problems with them are low gain, low power handling capacity and hence, conventional yagi-uda antennas are used. Conventional yagi-uda antennas are used in applications where high gain and directionality are required. Generally, number of directors are added to increase gain of these antennas. But, here we present...
متن کاملMIMO Antenna for Bluetooth, Wi-Fi, Wi-MAX and UWB Applications
A Multiple Input Multiple Output (MIMO) antenna consisting of two 90◦ angularly separated semicircular monopoles with steps for Bluetooth, Wi-Fi, Wi-MAX and UWB applications is proposed. Initially, an array of two coplanar circular monopoles with element separation of 25 mm is investigated. In this configuration, mutual coupling is < −5 dB and < −10 dB over 2 GHz–3 GHz and 3GHz–10.6GHz, respect...
متن کاملFully 3D Printed 2.4 GHz Bluetooth/Wi-Fi Antenna
3D printing and printed electronics are combined to demonstrate the feasibility of printing electrically functional RF devices. A combined process is used to demonstrate the feasibility of fabricating a 2.4 GHz antenna in a fully-3D printed object. Both dielectric, which also serves as the structure, and conductors are printed. Full-wave models are generated using Ansoft HFSS. Real-world tests ...
متن کاملDesign and Fabrication of Plasma Array Antenna with Beam Forming
In this paper, the design and implementation of plasma antenna array with beam forming is discussed. The structure consists of a circular array of plasma tube enclosed in a unipolar UHF band monopole antenna. Beam forming is possible by stimulated plasma tubes. The combination of the above antenna with plasma excitation controller makes a beam forming smart antenna. An experimental model in UHF...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fundamental and Applied Sciences
سال: 2018
ISSN: 1112-9867
DOI: 10.4314/jfas.v9i5s.63