Design and CFD Analysis of Hypersonic Nose Cone
نویسندگان
چکیده
منابع مشابه
Flowfield Uncertainty Analysis for Hypersonic CFD Simulations
Uncertainty quantification (UQ) in the hypersonic flow regime offers valuable information to determine physical models in need of improvement and to assist in design of vehicles and flight experiments. Here we present results of UQ analysis based on polynomial chaos method to determine flowfield and surface heat flux uncertainty under typical blunt-body re-entry conditions. The NASA Langley cod...
متن کاملCfd Analysis of Chemical Transport in Human Nose
The paper aims to simulate the chemical transport of ammonia vapor with density ρ = 0.6894 kg/m and coefficient of viscosity μ = 1.015e-05 kg/m-s inside the healthy Indian nose by computational fluid dynamics (CFD) technique and to analyze the olfactory sensitivity. The computed tomographic images of a healthy adult with normal nasal structure and function was used to built a physically realist...
متن کاملCFD Validation Studies for Hypersonic Flow Prediction
A series of experiments to measure pressure and heating for code validation involving hypersonic, laminar, separated flows was conducted at the Calspan-University at Buffalo Research Center (CUBRC) in the Large Energy National Shock (LENS) tunnel. The experimental data serve as a focus for a code validation session but are not available to the authors until the conclusion of this session. The f...
متن کاملEvaluation of CFD Codes for Hypersonic Flow Modeling
The intent of this study is to evaluate existing gaps in computational fluid dynamics (CFD) technology with an emphasis on hypersonic flow modeling. The importance of validation is highlighted, especially with respect to the dearth of available hypersonic flow data. Modeling challenges relevant to hypersonic air-breathing propulsion, such as multi-phase flow and turbulent mixing, are discussed ...
متن کاملHypersonic Flows About a 25° Sharp Cone
This paper presents the results of a numerical study that examines the surface heating discrepancies observed between computed and measured values along a sharp cone. With Mach numbers of an order of 10 and the free-stream length Reynolds number of an order of 10 000, the present computations have been made with the direct simulation Monte Carlo (DSMC) method by using the G2 code of Bird. The o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2020
ISSN: 2321-9653
DOI: 10.22214/ijraset.2020.30549