Design and application of double stove wires high-temperature furnace in high-temperature creep rupture test
نویسندگان
چکیده
Abstract This paper presented a high-temperature furnace with double electric stove wires for the test of creep rupture, adopted 5 mm wire in diameter, and are made up working alternate wire. When tester system detects is fractured, it will automatically quickly switch power supply circuit from to Then starts heat keep working, reducing loss caused by interruption on account fractured Experimental result indicates that can solve problem when difficult proceed long time rupture classical furnace. Besides, diameter also meet temperature control ultra-high-temperature (such as 1200 °C) Creep test.
منابع مشابه
Ultra High Temperature Microwave Sintering – Furnace and Process Design
Scale up of microwave sintering for high temperature stable non-oxide ceramics, such as SiC, Si3N4, and dispersion ceramics, like SiC-MoSi2 is still difficult, mainly because of lack of an affordable equipment. For air atmosphere sintering different furnaces were developed, like e.g., gas-microwave hybrid heated tunnel kilns [1] or microwave sintering using an adiabatic casket in tunnel kilns [...
متن کاملA High-temperature Powder Diffraction Furnace
A new high-temperature XRD instrument, utilizing multilayer optics and a custom furnace, has been developed to maximize sensitivity and minimize problems associated with sample displacement. This paper will describe the technical specifications of the new instrument, and will present temperature calibration with standard reference materials and measurement of phase evolution in an industrial gl...
متن کاملCreep Parameters of Spruce Wood in High Temperature Environment
The paper presents partial results of an ongoing project dealing with thermal diffusion and mechanical behavior of spruce wood in high temperature environment (up to 180°C). The objective of this part of study was to obtain rheological properties of spruce wood which will be used in future modeling of wood performance in high temperatures. Oven dry samples (30 x 30 x 700 mm) underwent constant ...
متن کاملHIGH TEMPERATURE ELASTIC PROPERTIES OF REFRACTORY MATERIALS
Abstract: A pulse-echo technique, based on ultrasonic "long-bar" mode (LBM) velocity measurements, working up to 1700°C is described. Magnetostrictive transducers and ultrasonic lines used in a 40-85 kHz frequency range are detailed. The conditions of choice of fundamental parameters (frequency, line geometry, sample size) are discussed in relation with the nature and the microstructure of ...
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2023
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2418/1/012059