Design and Application of a Direct-Push Vadose Zone Gravel Permeameter

Design and application of a direct-push vadose zone gravel permeameter.

A borehole permeameter is well suited for testing saturated hydraulic conductivity (K(sat)) at specific depths in the vadose zone. Most applications of the method involve fine-grained soils that allow hand auguring of test holes and require a small water reservoir to maintain a constant head. In non-cohesive gravels, hand-dug test holes are difficult to excavate, holes are prone to collapse, an...

Biodegradation in the Vadose Zone

Oxygen profiling of the unsaturated zone using direct push drilling.

A methodology for oxygen profile measurements in the unsaturated zone is developed based on direct push drilling using sampling liners equipped with homemade silicone septa. The oxygen measurement is carried out by puncturing the septum with a commercial retractable optode needle fitted with a fluorescent tip. Metrological characteristics and method validation were carried out under laboratory ...

Vadose Zone Processes and Chemical Transport

soils. A natural obstacle to this practice is the accelerated aging of iron and loss of reactivity resulting from O2 Permeable zerovalent iron (Fe0 ) barriers have become an estabin the soil atmosphere. Despite this apparent limitation, lished technology for remediating contaminated ground water. This same technology may be applicable for treating pesticides amenable situations could arise wher...

Application of a Darcian Approach to Estimate Liquid Flux in a Deep Vadose Zone

near-surface environment. Also, many of the complicating effects found in the near-surface environment will Approaches for estimating liquid flux in the shallow (0–2 m) vadose be damped or eliminated with increasing depth. For zone are hindered by the high degree of spatial and temporal variability present near the land surface. It is hypothesized that high-frequency these reasons, flux measure...