Design and Analysis of Single Inverter-Fed Brushless Wound Rotor Vernier Machine
نویسندگان
چکیده
In this paper, a brushless wound rotor vernier machine (Bl-WRVM) with single inverter configuration is proposed to achieve the operation. topology, connected series-connected ABC and XYZ windings through which current flow produces magnetomotive force fundamental sub-harmonic components, respectively. The have similar pole pairs excitation windings, whereas its number of poles different from winding. A 24-slot stator, 4-pole armature winding, 2 Pole 44-pole field winding for outer designed 2D finite element analysis carried out determine performance machine. topology makes Bl-WRVM cost-effective by applying only as compared dual-inverter it improves torque quality.
منابع مشابه
Brushless Wound-Rotor [Synchronous] Doubly-Fed Electric Machine By Real-time Control
Experts theorized that a Brushless Wound-rotor [Synchronous] Doubly-fed Electric Machine System (BWRSDF), which can symmetrically motor or generate with variable speed, provides higher efficiency, higher power density, higher torque density, and lower cost than any other electric machine system, including the permanent magnet electric machine system, but only with the discovery of a practical b...
متن کاملA Novel Wound Rotor Type for Brushless Doubly Fed Induction Generator
The rotor configuration of the brushless doubly fed induction generator (BDFIG) plays an important role in its performance. In order to make the magnetomotive force (MMF) space vector in one set rotor windings to couple both magnetic fields with different pole-pair and have low resistance and inductance, this paper presents a novel wound rotor type for BDFIG with low space harmonic contents. In...
متن کاملReal-time Rotor Bar Current Measurements Using Bluetooth Technology for a Brushless Doubly-fed Machine (bdfm)
The Brushless Doubly Fed Machine (BDFM) shows economic promise as a variable speed drive or generator. The optimization of the machine and model-based control strategies both rely on machine models, and the experimental verification of these models. To date, dynamic measurements of rotor quantities have not been possible. The authors present a system of measuring rotor bar currents in real time...
متن کاملRotor parameter determination for the Brushless Doubly Fed (Induction) Machine (BDFM)
A procedure has been established for obtaining equivalent circuit parameters for the Brushless Doubly Fed Machine (BDFM), also known as the Brushless Doubly Fed Induction Machine (DFIM), by transforming a reduced coupled-circuit model into a sequence component form. This approach takes advantage of the model reduction procedure’s ability to reduce a complex rotor structure to a single equivalen...
متن کاملPerformance Analysis and Simulation of a Novel Brushless Double Rotor Machine for Power-Split HEV Applications
A new type of brushless double rotor machine (BDRM) is proposed in this paper. The BDRM is an important component in compound-structure permanent-magnet synchronous machine (CS-PMSM) systems, which are promising for power-split hybrid electric vehicle (HEV) applications. The BDRM can realize the speed adjustment between claw-pole rotor and permanent-magnet rotor without brushes and slip rings. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2022
ISSN: ['2169-3536']
DOI: https://doi.org/10.1109/access.2022.3209501