Design and Analysis of Jet Vane Thrust Vectoring Nozzle using CFD and Optimization of Nozzle Parameters
نویسندگان
چکیده
منابع مشابه
Experimental and CFD Investigation of Nozzle Angle in Jet Mixer
In this work, the results of mixing study by a jet mixer in a tank have been investigated in the laboratory scale. The tank dimensions are and the jet entrance have been considered in the center of upper surface of tank. RNG-k-ε model is used as the turbulent model for the prediction of the pattern of turbulent flow inside the tank. For this purpose, a tank with volume of 110 liter is simulated...
متن کاملAnalytical and Experimental Evaluation of Aerodynamic Thrust Vectoring on an Aerospike Nozzle
Results from numerical and coldow experimental investigations of aerodynamic thrust vectoring on a small-scale aerospike thruster are presented. Thrust vectoring was created by the injection of a secondary uid into the primary ow eld normal to the nozzle axis. The experimental aerospike nozzle was truncated at 57% of its full theoretical length. Data derived from coldow thrust vectoring tests w...
متن کاملJet Attachment Behavior using Counterflow Thrust Vectoring
A modeling and experimental study was performed to examine the jet attachment process, which can develop during the fluidic thrust vector control of subsonic and supersonic jets. Experiments performed in rectangular jets up to Mach 1.4 revealed that continuous control of jet exhaust is possible with secondary mass flow rates of the order of 1% of the primary jet mass. Under certain operating co...
متن کاملDesign of a Small Scale Aerospike Nozzle and Associated Testing Infrastructure for Experimental Evaluation of Aerodynamic Thrust Vectoring
A system for cold ow testing of an aerospike nozzle has been developed in an e ort to examine the e ectiveness of aerodynamic thrust vectoring and truncated nozzle base bleed. These tests are designed to produce results that will support the design of a system for hot ow testing of the same technologies. Design of a nozzle suitable for testing with reasonable cold-gas mass ow rates and measurea...
متن کاملSelected Performance Measurements of the F-15 Active Axisymmetric Thrust-vectoring Nozzle
Flight tests recently completed at the NASA Dryden Flight Research Center evaluated performance of a hydromechanically vectored axisymmetric nozzle onboard the F-15 ACTIVE. A flight-test technique whereby strain gages installed onto engine mounts provided for the direct measurement of thrust and vector forces has proven to be extremely valuable. Flow turning and thrust efficiency, as well as no...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indian Journal of Science and Technology
سال: 2016
ISSN: 0974-5645,0974-6846
DOI: 10.17485/ijst/2016/v9i39/100778