Design and Analysis of Fused Deposition Modeling 3D Printer Nozzle for Color Mixing
نویسندگان
چکیده
منابع مشابه
Dual-color mixing for fused deposition modeling printers
In this work we detail a method that leverages the two color heads of recent low-end fused deposition modeling (FDM) 3D printers to produce continuous tone imagery. The challenge behind producing such two-tone imagery is how to finely interleave the two colors while minimizing the switching between print heads, making each color printed span as long and continuous as possible to avoid artifacts...
متن کاملColor Printer Characterization by 3D Triangulation
A new method for the colorimetric characterization of a printer is proposed. It can also be applied to any other type of digital image reproduction device. The method is based on a computational geometry approach. It uses a 3D triangulation technique to build a tetrahedral partition of the printer color gamut volume and it generates a surrounding structure enclosing the definition domain. The c...
متن کاملMulti-nozzle deposition for construction of 3D biopolymer tissue scaffolds
Purpose – To introduce recent research and development of biopolymer deposition for freeform fabrication of three-dimensional tissue scaffolds that is capable of depositing bioactive ingredients. Design/methodology/approach – A multi-nozzle biopolymer deposition system is developed, which is capable of extruding biopolymer solutions and living cells for freeform construction of 3D tissue scaffo...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملFused Deposition Modeling 3D Printing for (Bio)analytical Device Fabrication: Procedures, Materials, and Applications
In this work, the use of fused deposition modeling (FDM) in a (bio)analytical/lab-on-a-chip research laboratory is described. First, the specifications of this 3D printing method that are important for the fabrication of (micro)devices were characterized for a benchtop FDM 3D printer. These include resolution, surface roughness, leakage, transparency, material deformation, and the possibilities...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2017
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2017/2095137