DESIGN AND ANALYSIS OF CONNECTING ROD
نویسندگان
چکیده
The connecting rod is a major link inside of the combustion engine. It connects piston to crankshaft and responsible for transferring power from crankshaft. has work on higher r. p.m. because which it bear severe stresses make its design vital internal In this paper, two-wheeler designed by analytical method. On basis that physical model created in Solid Works. Structural system been analysed using Analysis. With use Analysis various are calculated loading conditions software ANSYS WORKBENCH 14.5. same carried out Aluminium alloy. obtained results (Stresses, shear stress, fatigue life based concluded suitable material compared. performances with considerable.
منابع مشابه
Finite Element Analysis of Connecting Rod
Abstract—The connecting rod transmits the piston load to the crank causing the latter to turn, thus converting the reciprocating motion of the piston into a rotary motion of the crankshaft. Connecting rods are subjected to forces generated by mass and fuel combustion. This study investigates and compares the fatigue behavior of forged steel, powder forged and ASTM a 514 steel cold quenched conn...
متن کاملProcess-based tolerance assessment of connecting rod machining process
Process tolerancing based on the process capability studies is the optimistic and pragmatic approach of determining the manufacturing process tolerances. On adopting the define–measure–analyze–improve–control approach, the process potential capability index (C p) and the process performance capability index (C pk) values of identified process characteristics of connecting rod ...
متن کاملProcess capability improvement of an engine connecting rod machining process
Statistical process control is an excellent quality assurance tool to improve the quality of manufacture and ultimately scores on end-customer satisfaction. SPC uses process monitoring charts to record the key quality characteristics (KQCs) of the component in manufacture. This paper elaborates on one such KQC of the manufacturing of a connecting rod of an internal combustion engine. Here th...
متن کاملDesign Analysis and Optimization of Various Parameters of Connecting Rod using CAE Softwares
The automobile engine connecting rod is a high volume production, critical component. It connects reciprocating piston to rotating crankshaft, transmitting the thrust of the piston to the crankshaft. Every vehicle that uses an internal combustion engine requires at least one connecting rod depending upon the number of cylinders in the engine. As the purpose of the connecting rod is to transfer ...
متن کاملANALYSIS AND OPTIMIZATION OF CONNECTING ROD USING ALFASiC COMPOSITES
Connecting rod is the intermediate link between the piston and the crank. And is responsible to transmit the push and pull from the piston pin to crank pin, thus converting the reciprocating motion of the piston to rotary motion of the crank. Generally connecting rods are manufactured using carbon steel and in recent days aluminium alloys are finding its application in connecting rod. In this w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indian Scientific Journal Of Research In Engineering And Management
سال: 2022
ISSN: ['2582-3930']
DOI: https://doi.org/10.55041/ijsrem11591