Design and analysis of compact dual resonance patch antenna
نویسندگان
چکیده
منابع مشابه
an infinite planar array of rectangular microstrip patch antenna analysis
the methods which are used to analyze microstrip antennas, are divited into three categories: empirical methods, semi-empirical methods and full-wave analysis. empirical and semi-empirical methods are generally based on some fundamental simplifying assumptions about quality of surface current distribution and substrate thickness. thses simplificatioms cause low accuracy in field evaluation. ful...
15 صفحه اولA dual-frequency compact microstrip patch antenna
In this paper, a new dual-frequency, compact antenna, which uses an H-shaped microstrip patch with a shorting pin, is described. Compared with the conventional rectangular patch antenna, this antenna can achieve both a significant reduction of antenna size and a dual-frequency operation with a single feed. More freedoms for tuning the resonant frequencies, the frequency ratio, and the input imp...
متن کاملCompact dual band slotted patch antenna for wireless systems
This paper presents the study on a slot-etched rectangular patch antenna directly fed by the 50 Ω semi miniature A-type (SMA) co-axial connector for wireless systems. The dual frequency behaviour by etching the slots on plane patch surface is studied experimentally. The proposed patch antenna has also achieved 28% compactness with a gain of 9.74 dB. Other antenna parameters such as antenna inpu...
متن کاملCompact Shorted Microstrip Patch Antenna for Dual Band Operation
In the present paper notch loaded shorted microstrip patch antenna has been analysed using cavity model. The proposed antenna shows dual band operation which depends on notch dimensions as well as shorting wall. The frequency ratio is found to be 1.5278 for the notch loaded rectangular patch, while in notch loaded shorted patch, the frequency ratio varies from 2.9764 to 2.725 for increasing val...
متن کاملA Compact Dual-band Patch Antenna for Wlan Applications
A compact dual-band patch antenna is proposed and measured in this paper. The proposed antenna employs a U-shaped slot and two mitered corners to achieve two operating frequency bands, 2.30 ∼ 2.50GHz and 4.50 ∼ 6.36GHz, which meet the specifications of IEEE 802.11b/g/a standard for WLAN applications. Full wave analysis is performed to simulate the characteristics of the proposed antenna using C...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Heritage and Sustainable Development
سال: 2020
ISSN: 2712-0554
DOI: 10.37868/hsd.v2i1.37