Design, Analysis and Fabrication of Instant water cooler using Thermoelectric Module
نویسندگان
چکیده
منابع مشابه
Micro thermoelectric cooler: Planar multistage
A suspended, planar multistage micro thermoelectric (TE) cooler is designed using thermal network model to cool MEMS devices. Though the planar (two-dimensional) design is compatible with MEMS fabrication, its cooling performance is reduced compared to that of a pyramid (three-dimensional) design, due to a mechanically indispensable thin dielectric substrate (SiO2) and technical limit on TE fil...
متن کاملMicro Thermoelectric Cooler Fabrication: Growth and Characterization of Patterned Sb2Te3 and Bi2Te3 Films
A column-type micro thermoelectric cooler is being fabricated using p-type Sb2Te3 and n-type Bi2Te3 films (approximately 4 μm thick). The films are grown by thermal co-evaporation and patterned on Cr/Au/Ti/Pt (hot) connectors, which are deposited onto a silicon dioxide coated wafer. The column height is limited by control of the Te deposition rate. Although a high substrate temperature during t...
متن کاملEffect of conjugate heat transfer in designing thermoelectric beverage cooler
Peltier technology opens new opportunities for special applications. In the current project, this technology was applied to design and fabricate a portable thermoelectric beverage cooler and thermoelectric cup. The simulation and results of the experiment showed that the common beverage cooler is not a suitable design for ignoring the effect of natural convection in cooling. In our thermoel...
متن کاملCoefficient of Performance Optimization of a Single Stage Thermoelectric Cooler
In thermoelectric coolers (TECs) applied external voltage potential is generated to a temperature difference based on the Peltier effect. Main and basic structure of TECs is in the form of single stage device. Due to the low efficiency, especially low coefficient of performance (COP) of thermoelectric coolers, optimal design of geometrical parameters of such devices is vital. For this purpose, ...
متن کاملEntropy Generation Minimization of a Thermoelectric Cooler
In the present work, we develop a theoretical analysis to minimize the entropy generation of a thermo-electric cooler (TEC), which can be used to cool a processor. We have applied an analysis of first and second law of the Thermodynamics to a TEC. We consider the entropy generation equation as the objective function and the first law as a restriction, in accordance with the variational calculus...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: July 2020
سال: 2020
ISSN: 2455-3778
DOI: 10.46501/ijmtst060720