Deposition of Selective Catalytic Reduction Coating on Wire-Mesh Structure by Atmospheric Plasma Spraying
نویسندگان
چکیده
منابع مشابه
PREPARATION OF CATALYTIC COATING OF TITANIUM OXIDE BY MEANS OF ELECTROLYTIC DEPOSITION
In the current research, the optimum conditions for the electrolytic deposition of TiO2 coatings on titanium pieces were experimentally investigated. Flat pieces of commercially available titanium with dimensions of 50 x20 x3 mm were used as the anode and cathode electrodes. The coatings were applied on the cathode in an electrolyte solution essentially from water and methanol, containing diffe...
متن کاملایجاد لایه سوپرآلیاژ بر روی فوم های نیکلی توسط عملیات پاشش گرمایی
Open pore metallic foams can be used for high temperature, high performance heat exchanger due to their high gas permeability and heat conductivity provided that skins properly attach to the foam’s struts on the surface. In the current study, a novel process was successfully developed to fill pores on the surface of the foam sheet in order to deposit skin on the foam specimens by thermal sprayi...
متن کاملMicrostructure and Property of Zr-Based Metallic Glass Coating Formed by Gas Tunnel Type Plasma Spraying
Metallic glass has excellent functions such as high strength and high corrosion resistance. Therefore, it is one of the most attractive materials, and various developmental research works have been conducted by many researchers. However, the metallic glass material is expensive to use, and a composite material is preferred for the industrial application. Thermal spraying method is one of potent...
متن کاملSelective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase
The xerogel samples were prepared by hydrolysis and condensation of tetraethyl orthosilicate (TEOS) by the sol-gel method. In this investigation, a new molar ratio of H2O/TEOS was determined to be 11.7. Also, the necessary amounts of tri-hydrated copper nitrate and penta-hydrated copper sulfate were added to the solution in such a manner that the concentration of the copper oxide in final solut...
متن کاملPlasma-Assisted Deposition at Atmospheric Pressure
In plasma-assisted deposition methods the activation energy necessary for the initiation of chemical reactions is transferred via charged particles. Due to this fact in many cases the process temperature can be kept small, if gas discharges at pressures below 1 hPa are used. On the other hand low pressure requires a great deal of vacuum equipment. Processes at atmospheric pressure are more favo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12183046