Deposition Kinetics of CVD-Silicon Carbonitride Coatings
نویسندگان
چکیده
منابع مشابه
Laser-Induced Chemical Vapour Deposition of Silicon Carbonitride
Laser-induced Chemical Vapour Deposition of silicon carbonitride coatings and powders has been investigated using hexamethyldisilazane (HMDS) and ammonia as reactants. An industrial CW CO2-laser in parallel configuration has been used to heat up the reactant gases. HMDS dissociates in the laser beam and reactive radicals are formed which increase rapidly in molecular weight by an addition mecha...
متن کاملAtmospheric Pressure Plasma CVD of Amorphous Hydrogenated Silicon Carbonitride (aSiCN:H) Films Using Triethylsilane and Nitrogen
Amorphous hydrogenated silicon carbonitride (a-SiCN:H) thin films are synthesized by atmospheric pressure plasma enhanced chemical vapor (AP-PECVD) deposition using the Surfx Atomflow 250D APPJ source with triethylsilane (HSiEt3, TES) and nitrogen as the precursor and the reactive gases, respectively. The effect of the substrate temperature (Ts) on the growth characteristics and the properties ...
متن کاملShutterless deposition of phosphorous doped microcrystalline silicon by Cat-CVD
In this paper we present results on phosphorous-doped c-Si:H by catalytic chemical vapour deposition in a reactor which internal arrangement does not include a shutter. An incubation phase of around 20 nm seems to be the result of the uncontrolled conditions that take place during the first stages of deposition. The optimal deposition conditions found lead to a material with a dark conductivit...
متن کاملInfluence of deposition rate on the structural properties of plasma-enhanced CVD epitaxial silicon
Solar cells based on epitaxial silicon layers as the absorber attract increasing attention because of the potential cost reduction. In this work, we studied the influence of the deposition rate on the structural properties of epitaxial silicon layers produced by plasma-enhanced chemical vapor deposition (epi-PECVD) using silane as a precursor and hydrogen as a carrier gas. We found that the cry...
متن کاملHigh-rate deposition of amorphous silicon films using hot-wire CVD with a coil-shaped filament
To reduce the manufacturing cost of amorphous silicon (a-Si:H)-based photovoltaic devices, it is important to deposit highquality a-Si:H and related materials at a high deposition rate. To this end, we designed and constructed a hot-wire deposition chamber with a coiled filament design and with multiple gas inlets. The process gas could be directed into the chamber through the filament coil and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Le Journal de Physique IV
سال: 1995
ISSN: 1155-4339
DOI: 10.1051/jphyscol:1995526