Deoxidation of 18-8 Stainless Steel Si, Mn and Al
نویسندگان
چکیده
منابع مشابه
Production and Characterization of Stainless Steel Based Fe-Cr-Ni-Mn-Si(-CO) Shape Memory Alloys
It is well known that the Fe based alloys can exhibit shape memory effect due to the y to E martensitic transformation. The effect may not be as striking as observed in the NiTi alloy but it might become attractive fkom the practical point of view. In this work, two compositions of Fe-Cr-Ni-Mn-Si(-Co) stainless steel based shape memory alloy, prepared by the VIM technique, will be presented. Th...
متن کاملNumerical Simulation of High Temperature Corrosion Processes in Mn, Cr, Si, Al – Alloyed Steel Samples
The grain boundary oxidation mechanism in hot rolled steel samples during cooling from 500 °C – 800 °C down to room temperature was mathematically modeled. Given a fixed temperature ramp, the migration of the atomic species (iron, oxygen and the alloying elements) has been calculated with the parabolic rate equation for diffusion. After each small time step, the data was transferred into the da...
متن کاملEvaluation of Deoxidation Process in Medical Grade of 316L Stainless Steel
In the present work, deoxidation and refining of 316LVM steel (Low carbon Vacuum Melted) during the vacuum induction melting process was studied. This grade of stainless steel is one of the most import...
متن کاملAlumina Inclusion Behavior during Steel Deoxidation
A computational model based on classic homogenous nucleation theory, thermodynamic analysis and numerical simulation, has been developed to study steel deoxidation by aluminum in a low carbon aluminum-killed steel ladle, which calculates the nucleation and time evolution of the alumina inclusion size distribution due to Ostwald ripening, Brownian collision and turbulent collision. Starting with...
متن کاملDevelopment of hard intermetallic coatings on austenitic stainless steel by hot dipping in an Al-Si alloy
The austenitic stainless steel was coated by dipping into a molten Al-12.4%Si alloy at 765oC. The effect of immersion times in the range of 60 to 900 s was investigated with respect to the phase nature, thickness, and microhardness. An uniform layer (~12 m) of Al12(Fe,Cr)3Si2 intermetallic with hexagonal crystalline structure is formed, irrespectively the immersion time. Microhardness of the c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1971
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.57.13_1976