Densification and Grain Growth of Iron and Copper Ultrafine Powders during Sintering
نویسندگان
چکیده
منابع مشابه
Full densification of Molybdenum powders using Spark Plasma Sintering
Pure molybdenum powder was sintered using Spark Plasma Sintering under various temperatures, and holding times, under a pressure of 77 MPa and a heating rate at 700°C/min. After sintering, a carbide layer was observed at the surface. The carbide layer thickness, the relative density of the sample as well as the microhardness and the grain size of Mo were measured. The carbide thickness depends ...
متن کاملLiquid Film Capillary Mechanism for Densification of Ceramic Powders during Flash Sintering
Recently, local melting of the particle surfaces confirmed the formation of spark and plasma during spark plasma sintering, which explains the rapid densification mechanism via liquid. A model for rapid densification of flash sintered ceramics by liquid film capillary was presented, where liquid film forms by local melting at the particle contacts, due to Joule heating followed by thermal runaw...
متن کاملTwo-step flash sintering of ZnO: Fast densification with suppressed grain growth
Article history: Received 19 June 2017 Received in revised form 14 July 2017 Accepted 14 July 2017 Available online xxxx Two-step flash sintering (TSFS) was proposed as a new ceramic fabrication method to achieve fast densification with suppressed grain growth. Using ZnO as an examplar, ~96.5% of theoretical density was achieved using TSFS with a grain size of ~370 nm, representing a N3 times r...
متن کاملSpark Plasma Sintering of Commercial Zirconium Carbide Powders: Densification Behavior and Mechanical Properties
Commercial zirconium carbide (ZrC) powder is consolidated by Spark Plasma Sintering (SPS). Processing temperatures range from 1650 to 2100 °C. Specimens with various density levels are obtained when performing single-die SPS at different temperatures. Besides the single-die tooling setup, a double-die tooling setup is employed to largely increase the actual applied pressure to achieve higher de...
متن کاملpetrology and geochemistry of khar-bash (western shahrood) and its relation ship to iron mineralization
منطقه مورد مطالعه در 23 کیلومتری جنوب غرب شهرستاشاهرود قرار دارد که در نقشه 100000/1 شاهرود قرار گرفته است.ناحیه مورد مطالعه در تقسیمات ساختاری ایران بخشی از زون البرز شرقی است . در طی سنوزوئیک این زون به شدت تحت تأثیر فازهای کوهزایی آلپی قرار گرفته و فعالیت های آتشفشانی انوسن در قسمت های غربی آن دیده می شود . از نظر ترکیب سنگ شناسی منطقه مورد مطالعه متنوع و بیشتر شامل سنگ های رسوبی مانند : آ...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1986
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.50.12_1089