Demonstrations of electronic pattern switching and 10× pattern demagnification in a maskless microion-beam reduction lithography system
نویسندگان
چکیده
منابع مشابه
Fullerene-assisted electron-beam lithography for pattern improvement and loss reduction in InP membrane waveguide devices.
In this Letter, we present a method to prepare a mixed electron-beam resist composed of a positive resist (ZEP520A) and C60 fullerene. The addition of C60 to the ZEP resist changes the material properties under electron beam exposure significantly. An improvement in the thermal resistance of the mixed material has been demonstrated by fabricating multimode interference couplers and coupling reg...
متن کاملCharge induced pattern distortion in low energy electron beam lithography
Charge induced pattern distortions in low voltage electron beam lithography in the energy range of 1 to 5 kV were investigated. Pattern distortion on conducting substrates such as silicon was found to be small, while significant pattern placement errors and pattern distortions were observed in the case of electrically insulating substrates caused by charge trapping and deflection of the inciden...
متن کاملDevelopment of an Immersion Maskless Lithography System
As lithography quickly approaches its limits with current technologies, a host of new ideas is being proposed in hopes of pushing lithography to new levels of performance. The work presented in this thesis explores the use of an immersion scheme to improve the performance of a maskless lithographic technique known as Zone-Plate-Array Lithography (ZPAL). This is believed to be the first implemen...
متن کاملPatterned negative electron affinity photocathodes for maskless electron beam lithography
This work focuses on two issues crucial to achieving high throughput with a negative electron affinity semiconductor photocathode source. Monte Carlo simulations indicate that for a 50 kV system, as much as 8 mA of current may be delivered to the wafer to achieve a raw throughput of 20 8 in. wafers per hour with 0.1 mm minimum feature size ~assuming a resist sensitivity of 10 mC/cm!. In order t...
متن کاملDNA-Origami-Aided Lithography for Sub-10 Nanometer Pattern Printing
We report the first DNA-based origami technique that can print addressable patterns on surfaces with sub-10 nm resolution. Specifically, we have used a two-dimensional DNA origami as a template (DNA origami stamp) to transfer DNA with pre-programmed patterns (DNA ink) on gold surfaces. The DNA ink is composed of thiol-modified staple strands incorporated at specific positions of the DNA origami...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures
سال: 2003
ISSN: 0734-211X
DOI: 10.1116/1.1615978