Delamination of a thin sheet from a soft adhesive Winkler substrate
نویسندگان
چکیده
منابع مشابه
Influence of substrate compliance on buckling delamination of thin films
A thin film subject to in-plane compressive stress is susceptible to buckling-driven delamination. This paper analyzes a straight-sided delamination buckle with a focus on the effects of substrate compliance, following earlier work by B. Cotterell and Z. Chen. The critical buckling condition, the energy release rate and the mode mix of the interface delamination crack are calculated as a functi...
متن کاملCrumpling a thin sheet.
Crumpled sheets have a surprisingly large resistance to further compression. We have studied the crumpling of thin sheets of Mylar under different loading conditions. When placed under a fixed compressive force, the size of a crumpled material decreases logarithmically in time for periods up to three weeks. We also find hysteretic behavior when measuring the compression as a function of applied...
متن کاملWrinkling of a thin circular sheet bonded to a spherical substrate.
We consider a disc-shaped thin elastic sheet bonded to a compliant sphere. (Our sheet can slip along the sphere; the bonding controls only its normal displacement.) If the bonding is stiff (but not too stiff), the geometry of the sphere makes the sheet wrinkle to avoid azimuthal compression. The total energy of this system is the elastic energy of the sheet plus a (Winkler-type) substrate energ...
متن کاملDelamination of thin film strips
Delamination of residually stressed thin film strips is analyzed to expose the dependence on strip width and filmysubstrate elastic mismatch. Isotropic films and substrates are assumed. The residual stress in the film is tensile and assumed to originate from mismatch due to thermal expansion or epitaxial deposition. Full and partial delamination modes are explored. In full delamination, the int...
متن کاملOPTICAL PROPERTIES OF THIN Cu FILMS AS A FUNCTION OF SUBSTRATE TEMPERATURE
Copper films (250 nm) deposited on glass substrates, at different substrate temperatures. Their optical properties were measured by ellipsometery (single wavelength of 589.3 nm) and spectrophotometery in the spectral range of 200–2600 nm. Kramers Kronig method was used for the analysis of the reflectivity curves of Cu films to obtain the optical constants of the films, while ellipsometery measu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review E
سال: 2018
ISSN: 2470-0045,2470-0053
DOI: 10.1103/physreve.97.062803