Degradation of reactive blue 182 dye by heterogeneous Fenton reaction using modified fly ash/H2O2

Degradation of Anthraquinone Dye Reactive Blue 4 in Pyrite Ash Catalyzed Fenton Reaction

Pyrite ash (PA) is created by burning pyrite in the chemical production of sulphuric acid. The high concentration of iron oxide, mostly hematite, present in pyrite ash, gives the basis for its application as a source of catalytic iron in a modified Fenton process for anthraquinone dye reactive blue 4 (RB4) degradation. The effect of various operating variables such as catalyst and oxidant conce...

Degradation of Azo Dye Reactive Black 5 and Acid Orange 7 by Fenton-Like Mechanism

Degradation of crystal violet using copper modified iron oxide as heterogeneous photo-fenton reagent

The heterogeneous photo-Fenton degradation of crystal violet under visible light has been investigated usingcopper modified iron oxide. The photocatalyst has been prepared by coprecipitation method. The rate ofphotocatalyic degradation of dye was monitored spectrophotometrically. It has been observed thatphotocatalytic degradation follows pseudo first order kinetics. The effect of various param...

Efficient Fenton like degradation of Methylene blue in aqueous solution by using Fe3O4 nanoparticles as catalyst

Fe3O4 nanoparticles were prepared hydrothermally and characterized by X-Ray diffraction spectroscopy (XRD), and scanning electron microscopy (SEM). It was found that these nanoparticles can act as an efficient catalyst in the degradation of Methylene blue dye in aqueous solution in a Fenton like system in presence of 30% perhydrol. Uv-Vis spectroscopy was used to determine the concentration of ...

Decolorization and Degradation of Basic Blue 3 and Disperse Blue 56 Dyes Using Fenton Process

In this study, oxidative discoloration of Basic blue3 (B.B3) and Disperse blue56 (D.B56) dyes in synthetic textile wastewater has been studied using Fenton (Fe2+/H2 O2 ) process. The Fenton’s technique showed satisfactory color removal efficiency. The operating parameters such as concentration of Fe2+, dose of H2 O2 , initial concentration of dye, time contact, initial volume of wastewater that...