Degassing and consolidation in aluminum powder metallurgy.
نویسندگان
چکیده
منابع مشابه
Accelerated Threshold Fatigue Crack Growth Effect – Powder Metallurgy Aluminum Alloy
Fatigue crack growth (FCG) research conducted in the near threshold regime has identified a room temperature creep crack growth damage mechanism for a fine grain powder metallurgy (PM) aluminum alloy (8009). At very low ∆K, an abrupt acceleration in room temperature FCG rate occurs at high stress ratio (R = Kmin/Kmax). The near threshold accelerated FCG rates are exacerbated by increased levels...
متن کاملEffects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts
The effects of friction stir processing (FSP) on the microstructure and mechanical properties of aluminum powder metallurgy (PM) parts was investigated. PM parts were then subjected to FSP at advancing speeds (v) of 40-200 mm/min and tool rotational speeds (ω) of 800-1600 rpm. Microhardness (HV) and tensile tests at room temperature were used to evaluate the mechanical properties of the frictio...
متن کاملPorous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملModeling and Simulation of Press and Sinter Powder Metallurgy
EFFECTIVE COMPUTER SIMULATIONS of metal powder compaction and sintering are at the top of the powder metallurgy industry’s wish list. There is much anticipated advantage to such efforts, yet there are problems that will inhibit widespread implementation. Press-sinter powder metallurgy computer simulations currently focus on the use of minimal input data to help with process setup. Although the ...
متن کاملOn a Powder Consolidation Problem
The problem of the consolidation of an aerated fine powder under gravity is considered. The industrial relevance of the problem is discussed and a mathematical model is introduced. The mathematical structure is that of a coupled system for three unknowns, pressure, stress, and height of the powder in the (axisymmetric) bunker containing it. The system itself consists of a parabolic PDE, an ODE,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1987
ISSN: 0451-5994
DOI: 10.2464/jilm.37.656