Deformation Zone Geometry and Texture Gradients in Cold-Rolled Niobium
نویسندگان
چکیده
منابع مشابه
Deformation Microstructure and Texture in a Cold-Rolled Austenitic Steel with Low Stacking-Fault Energy
Deformation microstructure and texture in a cold-rolled austenitic steel 310S with low stacking fault energy (SFE) have been investigated by SEM and TEM. When 310S plates were rolled by 95% in thickness reduction, a remarkable development of the brass-type preferred orientation was confirmed by X-ray diffraction. SEM observations of the specimens with such texture exhibited a layered structure ...
متن کاملWork-Hardening and Deformation Mechanism of Cold Rolled Low Carbon Steel
The study reports the mechanical property and microstructure of cold rolled low carbon steel and its work-hardening behavior in the deformation process. The tensile test in room temperature of low carbon steel was implemented for the different cold rolling deformation, the stress-strain curve was draught according to the relationship between strength and deformation and fitted for the polynomia...
متن کاملStatistical analysis on static recrystallization texture evolution in cold-rolled AZ31 magnesium alloy sheet.
Cast AZ31B-H24 magnesium alloy, comprising Mg with 3.27 wt% Al and 0.96 wt% Zn, was cold rolled and subsequently annealed. Global texture evolutions in the specimens were observed by X-ray diffractometry after the thermomechanical processing. Image-based microstructure and texture for the deformed, recrystallized, and grown grains were observed by electron backscattered diffractometry. Recrysta...
متن کاملEFFECTS OF TEXTURE ON THE DAMPING CHARACTERISTICS OF COLD-ROLLED AND ANNEALED Ti50Ni40Cu10 SHAPE MEMORY ALLOY
S. H. Chang, S. H. Hsiao, National I-Lan University, Taiwan Cold-rolled and annealed Ti50Ni40Cu10 shape memory alloy possesses a major (110)[001] texture along the rolling direction and a minor {111} γ-fiber texture along the normal direction. The damping capacity of the B2→B19 and B19→B2 martensitic transformation internal friction peaks for the Ti50Ni40Cu10 shape memory alloy was more pr...
متن کاملVanadium in Cold-rolled Sheet Steels
In hot rolled products, which are the subject of other presentations here, vanadium has been used for many years in high strength products, often in combination with other microalloying additions such as niobium or titanium. Vanadium can provide important contributions via both precipitation strengthening and ferrite grain refinement (due to austenite conditioning during thermomechanical proces...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Texture of Crystalline Solids
سال: 1977
ISSN: 0309-7951
DOI: 10.1155/tsm.2.183