Deformation Zone Distribution of Continuous Extrusion Process
نویسندگان
چکیده
منابع مشابه
Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation
In the present investigation, two dimensional elastoplastic finite element analysis was conducted to assess the deformation characteristics of Al 1100 alloy during continuous confined strip shearing (C2S2) process. The results of simulations showed that the plastic strain distribution across the deformed sample is non-uniform irrespective of the amount of friction and C2S2 die angle. The most u...
متن کاملInvestigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion
Circular simple shear extrusion process was introduced as a new geometry for simple shear extrusion technique to fabricate ultrafine-grained materials. Similar to the simple shear extrusion method, this process is also based on direct extrusion, and the samples deform in a simple shear manner. In this investigation, the simulations were carried out using the commercial finite element code ABAQU...
متن کاملModeling of Inlet Zone in Hydrostatic Extrusion Process for Aluminum and Aluminum Alloys
The objective of this paper is to investigate the viscous shear heating effect on the formation of minimum film thickness in inlet zone of the hydrostatic extrusion process as function of various operating parameters. Minimum film thicknesses in the inlet zone has been evaluated at various extrusion speeds, material parameters, extrusion pressures, and die semiangle for extrusion of low strengt...
متن کاملan investigation in the deformation zone of the ecae process by the upper bound theorem
in the present paper, the deformation zone of the ecae (equal channel angular extrusion) process was investigated using the upper bound theorem. for this purpose, the shape of the streamlines in the deformation zone was assumed to be cubic bezier curves. then, the force required for the ecae process was optimized with regard to the parameters defining the shape of streamlines by the upper bound...
متن کاملModelling Nucleation and Cell Size During the Continuous Process of Extrusion Assisted by Supercritical CO 2
Polymer foaming with the process of extrusion assisted by supercritical CO2 is based on the injection of a supercritical fluid, in our case carbon dioxide, in a polymer, which has been previously melted in the barrel of an extruder. Upon depressurisation that happens in the die, nucleated bubbles will appear and grow. Modelling the nucleation and growth is important to better understand and mas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Technology
سال: 2015
ISSN: 1213-2489,1213-2489
DOI: 10.21062/ujep/x.2015/a/1213-2489/mt/15/2/161