DEFORMATION PERFORMANCE OF COMPOSITE STEEL BEAM
نویسندگان
چکیده
منابع مشابه
Deformation Characteristics of Composite Structures
The composites provide design flexibility because many of them can be moulded into complex shapes. The carbon fibre-reinforced epoxy composites exhibit excellent fatigue tolerance and high specific strength and stiffness which have led to numerous advanced applications ranging from the military and civil aircraft structures to the consumer products. However, the modelling of the beams undergoin...
متن کاملPrediction of Acoustic Performance of Composite Steel Floors
One method of constructing lightweight concrete floors in residential dwellings is to use a trapezoidal profile steel pan as a permanent form for a relatively thin pour of concrete. The resulting structure has enhanced stiffness to weight ratio due to the composite action between the steel and concrete, and the inherent improved stiffness of the profiled cross section. However the floor is stro...
متن کاملPREDICTION OF BIAXIAL BENDING BEHAVIOR OF STEEL-CONCRETE COMPOSITE BEAM-COLUMNS BY ARTIFICIAL NEURAL NETWORK
In this study, the complex behavior of steel encased reinforced concrete (SRC) composite beam–columns in biaxial bending is predicted by multilayer perceptron neural network. For this purpose, the previously proposed nonlinear analysis model, mixed beam-column formulation, is verified with biaxial bending test results. Then a large set of benchmark frames is provided and P-Mx-My triaxial ...
متن کاملSeismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall
In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...
متن کاملAnti-fatigue Performance Analysis on Steel Crane Beam
Loads and working conditions of the trapezoidal cross-section of 36 m span crane beam can be analyzed by finite element method. Firstly, analysis of the stress and deformation is completed under the dangerous condition of crane beam based on the ANSYS software; secondly, find out the stress concentration and fatigue crack sensitive area of the bearing; finally, capture the position of fatigue c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2011
ISSN: 1881-8153,1340-4202
DOI: 10.3130/aijs.76.1847