Deformation of Polycrystalline MgO at Elevated Temperatures
نویسندگان
چکیده
منابع مشابه
THE DEFORMATION BEHAVIOR OF AZ31 MAGNESIUM ALLOY AT ELEVATED TEMPERATURES
AZ31 magnesium alloy is considered as a promising alloy in various applications and industries. Furthermore, to design a proper hot working process (rolling, forging and extrusion), the assessment of hot working behaviour of the alloy is necessary. Accordingly, the hot deformation behaviour of AZ31 alloy was studied through hot compression testing method This was carried out in a wide range of ...
متن کاملDeformation of polycrystalline MgO at pressures of the lower mantle
[1] Room temperature investigations on the shear strength, elastic moduli, elastic anisotropy, and deformation mechanisms of MgO (periclase) are performed in situ up to pressures of 47 GPa using radial X-ray diffraction and the diamond anvil cell. The calculated elastic moduli are in agreement with previous Brillouin spectroscopy studies. The uniaxial stress component in the polycrystalline MgO...
متن کاملNumerical analysis of large deformation processes at elevated temperatures
The authors describe a theoretical model and kinematic approach suitable for the numerical analysis of problems at large deformation finite strains and rotations. The presented formulations are implemented incrementally with a non-linear and rate-dependent constitutive model, adequate to the simulation of high temperature processes. The large deformation kinematic model is based on the additive...
متن کاملSHOCK TEMPERATURES OF PREHEATED MgO
Shock temperature measurements via optical pyrometry are being conducted on <100> single-crystal MgO preheated beftire compression to 1905-1924 K. Planar shocks were generated by impacting hot Mo(driver plate)-MgO targets with Mo or Ta flyers launched by the Caltech two-stage light-gas gun up to 6.6 km/s. Quasi-brightness temperature was measured with 2-3% uncertainty by a 6-channel optical pyr...
متن کاملHydrodynamics of a Gas-Solid Fluidized Bed at Elevated Temperatures Using the Radioactive Particle Tracking Technique
Effect of temperature on hydrodynamics of bubbling gas-solid fluidized beds was investigated. Experiments were carried out in the range of 25-600 ºC and different superficial gas velocities in the range of 0.17-0.78 m/s with sand particles. Time-position trajectory of particles was obtained by radioactive particle tracking technique. These data were used for determination of mean velocitie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Ceramic Society
سال: 1965
ISSN: 0002-7820,1551-2916
DOI: 10.1111/j.1151-2916.1965.tb14695.x