Deformation mechanism of aluminum–magnesium alloys at elevated temperatures
نویسندگان
چکیده
منابع مشابه
THE DEFORMATION BEHAVIOR OF AZ31 MAGNESIUM ALLOY AT ELEVATED TEMPERATURES
AZ31 magnesium alloy is considered as a promising alloy in various applications and industries. Furthermore, to design a proper hot working process (rolling, forging and extrusion), the assessment of hot working behaviour of the alloy is necessary. Accordingly, the hot deformation behaviour of AZ31 alloy was studied through hot compression testing method This was carried out in a wide range of ...
متن کاملNumerical analysis of large deformation processes at elevated temperatures
The authors describe a theoretical model and kinematic approach suitable for the numerical analysis of problems at large deformation finite strains and rotations. The presented formulations are implemented incrementally with a non-linear and rate-dependent constitutive model, adequate to the simulation of high temperature processes. The large deformation kinematic model is based on the additive...
متن کاملCharacterization of Deformation Microstructure using Transmission Electron Microscopy: Observation of Cube Slip in γ-TiAl Alloys at Elevated Temperatures
This article gives a brief description of the use of diffraction contrast transmission electron microscopy for characterizing the deformation microstructure. The capabilities and limitations of different modes of microscopy are also discussed. One of strengths of transmission electron microscopy technique is its capability to identify uncommon deformation system. This is illustrated by the anal...
متن کاملEffect of hydrogen-sulfide on the hydrogen permeance of palladium–copper alloys at elevated temperatures
The hydrogen permeance of several 0.1 mm thick Pd–Cu alloy foils (80 wt.% Pd–20 wt.% Cu, 60 wt.% Pd–40 wt.% Cu and 53 wt.% Pd–47 wt.% Cu) was evaluated using transient flux measurements at temperatures ranging from 603 to 1123 K and pressures up to 620 kPa both in the presence and absence of 1000 ppm H2S. Sulfur resistance, as evidenced by no significant change in permeance, was correlated with...
متن کاملEmbrittlement of Al-Li-Cu-Mg alloys at slightly elevated temperatures: microstructural mechanisms of hardening
When underaged, damage tolerant Al-Li based alloys are exposed to slightly elevated temperatures (60 to 100oC), their strength increases and toughness decreases. To study the first stages of this process, 8090 sheet in three underaged heat treatment conditions, including T3, T81 and a multistage temper, was exposed for 1000 h at 70°C. Using a model for strengthening in combination with a quanti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science
سال: 2013
ISSN: 0022-2461,1573-4803
DOI: 10.1007/s10853-013-7555-7