Deformation Measurements of Gabion Walls Using Image Based Modeling
نویسندگان
چکیده
منابع مشابه
Deformation Analyses of Gabion Structures
This study proposed a numerical procedure to simulate the deformation behaviors of the uniaxial compression test of single gabion and of the lateral loading test of full scale gabion retaining wall. The validity of the numerical procedures is verified by the comparison of the measurements with the simulations of deformation behavior. In addition, two evaluation equations which are capable of es...
متن کاملFree-Standing Gabion Walls in Seismic Regions
This thesis investigates the behavior of free-standing gabion walls in areas of mild seismicity. To investigate this behavior, three walls of varying internal cable patterns were constructed at a quarter-scale. These walls were tested with a mass shaker, and mode shapes, tone extractions, and damping ratios were calculated. A modal analysis was conducted using design spectra created from a suit...
متن کاملImage - Based Multiresolution Modeling by Surface Deformation
This paper presents a novel approach for constructing multiresolution surface models from a set of calibrated images. The output is a texture-mapped triangular surface mesh that best matches all the input images. The mesh is obtained by deforming a generic initial mesh such as a sphere or cube according to image and geometry-based forces. This technique has the following key features: (1) the i...
متن کاملSeismic Behavior of One-Storey Gabion-Box Walls Buildings
Gabion-boxes, made with steel wire mesh and filled with stones of appropriated size, are normally stacked up one into another to form a retaining wall. Given their reduced costs and the easy availability of their constituting materials, gabion-box walls have been extensively used in developing countries (such as Nepal) also to realize simple one-storey residential buildings. In recent years, ma...
متن کاملLatex2e Cmu-techreport Image-based Multiresolution Modeling by Surface Deformation
This paper presents a novel approach for constructing multiresolution surface models from a set of calibrated images. The output is a texture-mapped triangular surface mesh that best matches all the input images. The mesh is obtained by deforming a generic initial mesh such as a sphere or cube according to image and geometry-based forces. This technique has the following key features: (1) the i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Geoinformatics FCE CTU
سال: 2014
ISSN: 1802-2669
DOI: 10.14311/gi.12.8